4specs.com    4specs.com Home Page

Archive through October 12, 2020 Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Coffee Pot and Water Cooler » A Thank You to Colin for Maintaining This Board » Archive through October 12, 2020 « Previous Next »

Author Message
Michael Chusid, RA FCSI CCS
Senior Member
Username: michael_chusid

Post Number: 568
Registered: 10-2003


Posted on Thursday, October 08, 2020 - 01:08 am:   Edit PostDelete PostPrint Post

A recommended cartoon: https://xkcd.com/2363/
Michael Chusid, RA FCSI CCS 1-818-219-4937
www.chusid.com www.buildingproduct.guru
James Sandoz, AIA, CSI, CCS
Senior Member
Username: jsandoz

Post Number: 306
Registered: 06-2005
Posted on Thursday, October 08, 2020 - 08:59 am:   Edit PostDelete PostPrint Post

I'm not sure what the link has to do with Colin maintaining this board but I do want to add my thanks. I have found 4specs.com in general, and the discussion forum in particular, to be very valuable in my work. I've met many of you in person at CSI and AIA functions but I feel like I know all frequent contributors well and have a level of trust in the information you provide. I also value your opinions because you show a passion for your work that the A/E/C field demands.

Kudos, Colin. Keep up the great work.
Brian E. Trimble, CDT
Senior Member
Username: brian_e_trimble_cdt

Post Number: 123
Registered: 08-2005


Posted on Thursday, October 08, 2020 - 09:57 am:   Edit PostDelete PostPrint Post

Yes, thanks to Colin for allowing us freedom to ask and answer questions about a variety of topics. I have learned so much from this website and I hope it continues for a long time...
Kudos to Colin and all the people here!
Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 2249
Registered: 07-2002


Posted on Thursday, October 08, 2020 - 12:23 pm:   Edit PostDelete PostPrint Post

Since I retired, I haven't used/posted anything much. But I still read most of what comes into my email and I still learn a lot of stuff. I have spread the word about this site and forum to many people in the industry because I KNOW its value.

Thank you, Colin, for doing this and all the other peripheral stuff - like the "no registration" buttons! (They are still talked about)
(Unregistered Guest)
Unregistered guest
Posted on Thursday, October 08, 2020 - 01:38 pm:   Edit PostDelete PostPrint Post

Thank you, Colin!

I didn't realize that 4specs has been around almost 20 years. I've been browsing the forum almost every day for most of that time, and have learned a lot from the discussions.
Nathan Woods, CSI, CCCA, LEED AP
Senior Member
Username: nwoods

Post Number: 829
Registered: 08-2005


Posted on Thursday, October 08, 2020 - 07:52 pm:   Edit PostDelete PostPrint Post

One of my proudest professional moments was successfully asking Colin to create a new channel on 4Specs (Construction Contract Administration Discussions). It was then that I realized I among professionals peers, not just the apprentice.

.....until I started contributing, thus proving otherwise :-)
James Sandoz, AIA, CSI, CCS
Senior Member
Username: jsandoz

Post Number: 307
Registered: 06-2005
Posted on Friday, October 09, 2020 - 08:28 am:   Edit PostDelete PostPrint Post

Nathan, I celebrated a "landmark" birthday last month. One thing I've realized over the decades is the more I know the more I don't know.

There is an upside of course: I don't have to worry about running out of things to learn :-) and I have a VAST resource of great knowledge to tap into.

Life is a journey. Believe me when I say your contributions, and those of our 4specs fellow travelers, are valuable and much appreciated.
J. Peter Jordan
Senior Member
Username: jpjordan

Post Number: 1137
Registered: 05-2004
Posted on Friday, October 09, 2020 - 10:10 am:   Edit PostDelete PostPrint Post

One of my co-workers was fond of saying "Why do you think they call it a practice?" I would then respond with "When are we going to get to do it for real?"

Since I started architecture school in the mid-60s and got my first summer job in an office the next summer, I can't think of anything in construction that hasn't changes including the size of a 2X4 and the process for manufacturing glass.
J. Peter Jordan, FCSI, AIA, CCS, LEED AP, SCIP
James Sandoz, AIA, CSI, CCS
Senior Member
Username: jsandoz

Post Number: 308
Registered: 06-2005
Posted on Monday, October 12, 2020 - 08:31 am:   Edit PostDelete PostPrint Post

Ah, Peter, the changes you must have witnessed. :-) Your experience, and that of others, is what makes this forum so valuable.

Someday I need to dig through my "archives" and find a home-made card a good friend gave me when I graduated. It read "James Sandoz - practicing architecture until he gets it right." Well, I'm still practicing.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration