4specs.com    4specs.com Home Page

Covered by Architect's Liability Insu... Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Coffee Pot and Water Cooler » Covered by Architect's Liability Insurance? « Previous Next »

Author Message
David G. Axt, CCS, CSI ,SCIP
Senior Member
Username: david_axt

Post Number: 1934
Registered: 03-2002


Posted on Wednesday, June 22, 2022 - 07:47 pm:   Edit PostDelete PostPrint Post

I know some of you believe that you will be covered by the Architect's liability insurance. Well I had an incident a few months back where a subcontractor threatened to sue me (long story). The architect then promptly stepped back and said that the issue was between me and the sub.

Luckily the issue got resolved, I did not get sued and I dropped the architect as a client.

So don't go around believing that your client will always protect you. They may, but I recommend that you protect yourself....in case your client decides to throw you under the bus.
David G. Axt, CCS, CSI, SCIP
Specifications Consultant
Axt Consulting LLC
Guest (Unregistered Guest)
Unregistered guest
Posted on Thursday, June 23, 2022 - 01:12 pm:   Edit PostDelete PostPrint Post

I have PLI policy...and my broker has said that "additional insureds" (e.g., subconsultants) cannot be added to PLI policies. So even though some may think (or have written into their agreements) they are "covered" under A/E's coverage, they are really not; have you ever noticed that prime agreements with public entities do not require naming public entity as "additional insureds" to PLI policies...only to general liability policies...maybe they realize they can't require something that can't be provided? Even with insurance coverage, if/when litigation starts to "fly", it will be everyone for themselves; it's naive to think your client will "lookout for you" when it's either your neck or theirs! Besides isn't it the reason you DBA as an LLC? To better protect your personal assets? Your LLC may go bankrupt but hopefully your personal assets won't be attached? If I may ask, would you "sleep better" if you did "bite the bullet" and pay for PLI? I sure do.
Phil Kabza
Senior Member
Username: phil_kabza

Post Number: 713
Registered: 12-2002


Posted on Friday, June 24, 2022 - 09:30 am:   Edit PostDelete PostPrint Post

David: Thank you for your post. New consultants need to hear this. And Guest: Very good points.

I enjoy a good relationship with a local AE liability insurance specialist agency. They have us placed with RLI at a reasonable cost with no deductible - it seems these folks understand our role as a technical consultant to the AOR.
Phil Kabza FCSI CCS AIA
SpecGuy Specifications Consultants
www.SpecGuy.com
phil@specguy.com
Mark Gilligan SE,
Senior Member
Username: mark_gilligan

Post Number: 974
Registered: 10-2007
Posted on Saturday, July 02, 2022 - 04:19 pm:   Edit PostDelete PostPrint Post

I think a key question is the specification writer a design professional who stamps and seals his work or does the specification writer make recommendations to the architect who freely decides to incorporate the recommendations into his work.
John Bunzick
Senior Member
Username: bunzick

Post Number: 1881
Registered: 03-2002
Posted on Sunday, July 03, 2022 - 04:32 pm:   Edit PostDelete PostPrint Post

I think that Mark has an interesting take. And along these lines, can an independent specifier have a clause in their contract with the architect that says they are not to be considered a "professional" in this context? If this exists, would it make any difference in a lawsuit? If it exists and there is no specifiers insurance, and the specifier has no significant assets, would such a lawsuit go anywhere? An example that is somewhat similar is the "interior designer" who is not licensed and provides primarily services regarding finishes and the like. Are they liable to be sued in such cases? How can they carry professional liability insurance if they are no considered "professionals" by law (in states where that is the case)?
Phil Kabza
Senior Member
Username: phil_kabza

Post Number: 716
Registered: 12-2002


Posted on Tuesday, July 05, 2022 - 08:22 am:   Edit PostDelete PostPrint Post

We do incorporate such a clause in our services agreement with Architects, or require they add this to a contract drafted by them. Anyone can sue anyone. The cost of getting out of an unjustified or inappropriate lawsuit can be significant. A few thousand dollars for PLI insurance seems like a good deal.
Phil Kabza FCSI CCS AIA
SpecGuy Specifications Consultants
www.SpecGuy.com
phil@specguy.com
Jeffrey Wilson CSI CCS SCIP
Senior Member
Username: wilsonconsulting

Post Number: 339
Registered: 03-2006


Posted on Tuesday, July 05, 2022 - 12:12 pm:   Edit PostDelete PostPrint Post

Specifiers can have liability regardless of whether they are acting in the capacity of design professional. Something as simple as a typo that causes a claim is the direct responsibility of the specifications consultant. There are other types of liability associated with our services where we can be considered at fault.

Although my agreements contain a clause deferring responsibility for decisions that are in the province of the architect, this will not protect me from errors that I might make. This alone justifies carrying liability insurance in my view, but many of my clients require it anyhow -- many in response to requirements of their clients. My practice would be cut by a substantial portion if I did not carry the insurance.
Jeffrey Wilson CCS CSI SCIP
Wilson Consulting Inc
Narberth PA
David G. Axt, CCS, CSI ,SCIP
Senior Member
Username: david_axt

Post Number: 1939
Registered: 03-2002


Posted on Tuesday, July 05, 2022 - 04:26 pm:   Edit PostDelete PostPrint Post

I do not believe there is any way for a specifier to defend themselves by saying, "Hey I worked on the project but am not liable for my work."

In the real world EVERYBODY gets sued. Then the lawyers sort out who is responsible for what percentage.

Here is a video on the $1.2 BILLION dollar settlement for Surfside Condo project.

https://www.youtube.com/watch?v=lXBtvov3DLg
David G. Axt, CCS, CSI, SCIP
Specifications Consultant
Axt Consulting LLC
Nathan Woods, CSI, CCCA, LEED AP
Senior Member
Username: nwoods

Post Number: 867
Registered: 08-2005


Posted on Tuesday, July 05, 2022 - 09:02 pm:   Edit PostDelete PostPrint Post

Wow, that video was very interesting. Amazing that the engineering firm that accurately reported the conditions and predicted the failure felt compelled to pay $16M in insurance money for the settlement. I kinda hate this world that requires insurance, but having insurance makes you a target. And what's worse is that insurance companies elect to settle, and just raise everyone's rates to pay for it. They never learn to stand up and fight these things, because the legal process is so inherently broken, no one needs to take accountability for anything. As a society, we are learning the exact wrong lesson and punishing the wrong people. Sigh....

Add Your Message Here
Post:
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration