| Author |
Message |
Loretta Sheridan
Senior Member
Username: leshrdn
Post Number: 87
Registered: 11-2021
| | Posted on Wednesday, April 26, 2023 - 05:10 pm: |    |
Do you find a two-part polyaspartic coating a little overkill for concrete floors in service areas like electrical closets, janitor closets, mechanical rooms? The manufacturer recommends it for airplane hangars, commercial kitchens, kennels, and for high traffic areas, and where chemical resistance is needed.
Just curious on your all thoughts. Thank you! |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 1564
Registered: 12-2006
| | Posted on Wednesday, April 26, 2023 - 08:17 pm: | |
A new first thing to get "value-engineered" and maybe it should be.
At that point you might as well consider PMMA. |
John Bunzick
Senior Member
Username: bunzick
Post Number: 1912
Registered: 03-2002
| | Posted on Thursday, April 27, 2023 - 03:55 pm: | |
My two cents is that each space may need something different: electrical closets don't need a finish - maybe just a sealer; janitorial spaces need something that withstands strong cleaners in case of spills; and mechanical rooms may need a waterproof coating depending on what's in them - in case equipment leaks (and I assume there are floor drains). |
4specs.com Home Page