| Author |
Message |
Chris Sanders
Senior Member
Username: chris_sanders
Post Number: 21
Registered: 05-2016
| | Posted on Monday, December 05, 2022 - 10:13 am: |    |
All - has anyone ever had to adhere insulation spindles to something like Henry Blueskin SA, which has a polyethylene film skin? If so, what type of adhesive did you use?
Thanks in advance for your insight, appreciate it! |
Jeffrey Potter
Senior Member
Username: jpotter
Post Number: 38
Registered: 02-2017
| | Posted on Monday, December 05, 2022 - 11:01 am: | |
Chris, reach out to the local Henry rep. They should be able to tell you what you can and can't use over their product. Don't want to void warranty. |
Nathan Woods, RA, CSI, CCCA, LEED AP
Senior Member
Username: nwoods
Post Number: 902
Registered: 08-2005
| | Posted on Monday, December 05, 2022 - 12:09 pm: | |
On a GE Elemax system, their SilPruf sealant (or Elemax 5000) has been used. This is not my project, but I thought it was interesting. |
Nathan Woods, RA, CSI, CCCA, LEED AP
Senior Member
Username: nwoods
Post Number: 904
Registered: 08-2005
| | Posted on Monday, December 05, 2022 - 12:12 pm: | |
Second attempt |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 1539
Registered: 12-2006
| | Posted on Monday, December 05, 2022 - 12:33 pm: | |
Nathan, I just received notice from GE for this webinar at the same time your note came through
https://siliconeforbuilding.com/awb-aia-webinar
Nice timing.
Best
Ken |
|
4specs.com Home Page