| Author |
Message |
Russ Hinkle, AIA, CDT, LEED BD+C
Senior Member
Username: rhinkle
Post Number: 149
Registered: 02-2006
| | Posted on Monday, December 28, 2020 - 11:22 am: |    |
Looking for a section for what is basically a barn door - sliding 12' wide pair x 30' tall. Little bit larger than interior doors I am use to.
Russ Hinkle |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 1327
Registered: 12-2006
| | Posted on Monday, December 28, 2020 - 11:37 am: | |
Russ, I usually use Richards Wilcox barn door hardware - https://rwhardware.com/product-finder/ and then specify whatever the door materials are. The hardware manufacturer should be able to help you size the hardware. |
Dave Metzger
Senior Member
Username: davemetzger
Post Number: 787
Registered: 07-2001
| | Posted on Monday, December 28, 2020 - 02:14 pm: | |
Russ, are you looking for the door section itself? Whether hollow metal or wood, I'd just use your normal door section, although for doors that size may need additional beefiness and reinforcing.
For hardware, I fully agree with Ken. Richards Wilcox has a good selection of heavy-duty door hardware. We've used them for gates for the panda house at the National Zoo. |
|
4specs.com Home Page