| Author |
Message |
Melissa Finch, CSI, CDT
Senior Member
Username: melgfinch
Post Number: 8
Registered: 02-2024
| | Posted on Thursday, March 21, 2024 - 10:55 am: |    |
Hi, I ran into an issue on a project the other day where a GC was asking us to provide a product to comply with the following line in the 06 41 16 - "Plastic-Laminate-Clad Architectural Cabinets" spec section:
"Door and Drawer Silencers: ANSI/BHMA A156.16, L03011."
When researching this, I could find products in compliance (similar to Rockwood 608), but they were all meant for regular doors/frames & not millwork doors & drawers. The product the GC submitted was similar to "Rockwood 608CA," but it doesn't mention compliance with this standard.
Is it possible the MasterSpec section is just wrong? That it isn't supposed to be there? Has anyone else run into this issue? Thanks! |
Loretta Sheridan
Senior Member
Username: leshrdn
Post Number: 128
Registered: 11-2021
| | Posted on Thursday, March 21, 2024 - 04:54 pm: | |
I remember it from a long time ago. I just deleted that text from the section, and specifically asked Interiors what they wanted me to use. Generally, it as a small, round, clear rubbery thing. They were on the cabinets in the office. |
guest (Unregistered Guest)
Unregistered guest
| | Posted on Friday, March 22, 2024 - 05:18 pm: | |
Masterspec gets more wrong as time goes on. |
Melissa Finch, CSI, CDT
Senior Member
Username: melgfinch
Post Number: 9
Registered: 02-2024
| | Posted on Tuesday, March 26, 2024 - 03:02 pm: | |
Loretta, yes I just now ran into this.. it does seem to be those round, clear, self-adhering silencers. I will remove it from my masters.
Do you know if there's a way to contact Deltek about this? Thank you! |
Loretta Sheridan
Senior Member
Username: leshrdn
Post Number: 129
Registered: 11-2021
| | Posted on Wednesday, March 27, 2024 - 09:30 am: | |
There used to be. I no longer use MasterSpecs, so I don't know how to contact them to let them know. |
Jeffrey Potter
Senior Member
Username: jpotter
Post Number: 49
Registered: 02-2017
| | Posted on Wednesday, March 27, 2024 - 10:17 am: | |
Hi Melissa, we do have a substantial update planned for later this year regarding that section. I did bring it up to the writer responsible and they are aware. Thank you for bringing this to our attention! |
4specs.com Home Page