4specs.com    4specs.com Home Page

liquid crystal glass Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #5 » liquid crystal glass « Previous Next »

Author Message
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 689
Registered: 01-2008


Posted on Friday, September 12, 2014 - 04:59 pm:   Edit PostDelete PostPrint Post

Does anyone know the rough cost of liquid crystal glass that can be made opaque electrically?
$
$$
$$$
$$$$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Brett Scarfino (Unregistered Guest)
Unregistered guest
Posted on Friday, September 12, 2014 - 06:05 pm:   Edit PostDelete PostPrint Post

The IGU's were not much more per sqft than the high quality low-e glass throughout (this was electrochromic glass)... I understood the big extra to be the hardware/controls/wiring as well as the extra coordination and labor the installation requires. I do not have numbers off hand.
Richard Howard, AIA CSI CCS LEED-AP
Senior Member
Username: rick_howard

Post Number: 285
Registered: 07-2003


Posted on Monday, September 15, 2014 - 01:20 pm:   Edit PostDelete PostPrint Post

We have used switchable privacy glass a number of times. The cost is in the range of $100 per sq. ft.; more if the unit sizes are small and less if the units and total order is bigger.
The switchable film does have a maxiumum size and if the units exceed that size, you will see a line where the sheets meet.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration