Neopor

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate Senior Member Username: lynn_javoroski Post Number: 1861 Registered: 07-2002 Posted on Thursday, July 24, 2014 - 10:49 am:    Has anyone used this product? We have a request from a certified precast plant to use this in lieu of polyiso for insulated precast sandwich panels. http://www.neopor.basf.us/ It has a slightly lower R value (3) and a lower cost (hence the request to use it). Any experience / thoughts / comments? George A. Everding, AIA, CSI, CCS, CCCA Senior Member Username: geverding Post Number: 755 Registered: 11-2004 Posted on Thursday, July 24, 2014 - 11:53 am:    I've always had positive experiences with BASF products. A go-to resource who you may know is Vickie Enloe of KC Chapter (I think she table topped at one of the recent NCR conferences). She doesn't cover your area, and may not rep this particular BASF product, but she can certainly put you in contact with the right people at BASF who will give you the straight story. She's listed in the CSI directory. Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate Senior Member Username: lynn_javoroski Post Number: 1863 Registered: 07-2002 Posted on Thursday, July 24, 2014 - 12:13 pm:    Thanks! I'll reach out to her.