| Author |
Message |
Robin E. Snyder
Senior Member
Username: robin
Post Number: 462
Registered: 08-2004
| | Posted on Sunday, June 02, 2013 - 05:07 pm: |    |
Does anyone know any manufacturers for this type of garage doors? This is for a multi-family housing project. |
David E Lorenzini
Senior Member
Username: deloren
Post Number: 142
Registered: 04-2000
| | Posted on Sunday, June 02, 2013 - 09:14 pm: | |
Robin
In my architectural practice days in California, I would just have them built on site. The spring hardware is readily available, and you can get a lot of customization instead of choosing from a catalog. They were usually made with plywood facing on a 2x2 wood frame.
David Lorenzini, FCSI, CCS
Architectural Resources Co. |
anon (Unregistered Guest)
Unregistered guest
| | Posted on Monday, June 03, 2013 - 12:21 pm: | |
Robin,
There are a few manufacturers for this type of garage door operation - called "one-piece garage door hardware." Here is one I know of:
http://www.apexhardware.com/ |
|
4specs.com Home Page