Need Hardware Ideas for 11'0 High Got...

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message jsmooreahc (Unregistered Guest) Unregistered guest Posted on Thursday, May 02, 2013 - 10:16 am:    I am serving as a hardware consultant on the construction of a small Gothic Cathedral. We have a pair of non-fire rated doors 11-4" tall leading into the Nave. The active leaf will have a deadbolt but I'm needing ideas on how to secure the inactive leaf. Anyone know where I can find 60" long decorative surface bolts? Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate Senior Member Username: lynn_javoroski Post Number: 1636 Registered: 07-2002 Posted on Thursday, May 02, 2013 - 10:47 am:    Take a look at some of the manufacturers listed under 08 7100 on this site. Richards-Wilcox, perhaps Ironmonger, or another one would have the ability to custom fabricate what you need. Wayne Yancey Senior Member Username: wayne_yancey Post Number: 586 Registered: 01-2008 Posted on Thursday, May 02, 2013 - 11:06 am:    Consider Crown Industrial Supply 1. Tel (650) 952-5150, Fax (650) 873-1495, Email billm@crown-industrial.com (Bill Morgan). 2. Web Site http://www.Crown-Industrial.com. Richard L Matteo, AIA, CSI, CCS Senior Member Username: rlmat Post Number: 581 Registered: 10-2003 Posted on Thursday, May 02, 2013 - 11:49 am:    Try Rocky Mountain Hardware http://www.rockymountainhardware.com/door-hardware you are probablt looking at Cremone Bolts. You might also try Baldwin Hardware. Jeffrey Leemhuis, AIA, CSI, CCS, LEED-AP, SCIP Affiliate Senior Member Username: jrlbarch Post Number: 31 Registered: 07-2005 Posted on Thursday, May 09, 2013 - 10:02 am:    You might try Crown City Hardware http://www.restoration.com/ They do have custom capabilities.