| Author |
Message |
Ralph Liebing, RA, CSI, CDT
Senior Member
Username: rliebing
Post Number: 1358
Registered: 02-2003
| | Posted on Tuesday, December 04, 2012 - 11:37 am: |    |
How do you approach/specify welding of the inside [concealed] side of SS frame joints? Is there a standard for this? |
Margaret G. Chewning FCSI CCS
Senior Member
Username: presbspec
Post Number: 227
Registered: 01-2003
| | Posted on Tuesday, December 04, 2012 - 11:54 am: | |
Welding standard for SS is AWS D1.6. As far as the finish goes, I require "Grind exposed joints flush and smooth with adjacent finish surface." |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 385
Registered: 12-2006
| | Posted on Tuesday, December 04, 2012 - 12:44 pm: | |
Check out the HMMA standard for stainless steel hollow metal doors and frames.
http://www.naamm.org/landing_pages/HMMA_866-12.htm |
4specs.com Home Page