5V CRIMP SHEET METAL ROOFING

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Jerome J. Lazar, RA, CCS, CSI, SCIP Senior Member Username: lazarcitec Post Number: 895 Registered: 05-2003 Posted on Friday, September 14, 2012 - 05:35 pm:    I am having the worse luck today trying to locate a manufacturer for a 5V Crimp Galvalume Panel for a mansard roof (to be installed over a concrete deck) in South Florida, it must have a current, approved NOA. My usual sources are coming up dry. I'll be honest I've not specified a 5v crimp configuration in over 10 years. Can anyone lead this old horse to water? Robert E. Woodburn Senior Member Username: bob_woodburn Post Number: 13 Registered: 11-2010 Posted on Friday, September 14, 2012 - 05:52 pm:    Try MBCI: http://www.mbci.com/5v.html Jerome J. Lazar, RA, CCS, CSI, SCIP Senior Member Username: lazarcitec Post Number: 896 Registered: 05-2003 Posted on Friday, September 14, 2012 - 06:01 pm:    Thanks this will be my 3rd, needed 3 manufs, already had metal sales and mcelroy, spec is due tonite.