| Author |
Message |
Di Ann Reid, CSI, CCS, CCCA, LEED AP
Senior Member
Username: dhassloch
Post Number: 28
Registered: 07-2005
| | Posted on Monday, September 10, 2012 - 04:00 pm: |    |
Doing some research to locate a mineral wool insulated metal panel. Has anyone used one before? Could you share the manufacturer?
Thanks! |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 333
Registered: 12-2006
| | Posted on Monday, September 10, 2012 - 05:26 pm: | |
I like the Mapes panel system but usually get push-back because of the cost. There are lots of concerns about using a laminated panel. Mapes has a hard substrate behind the metal face to prevent oil canning and delamination. It may cut into your R-value, but it's worth it IMHO. |
scott piper (Unregistered Guest)
Unregistered guest
| | Posted on Tuesday, September 11, 2012 - 09:48 am: | |
Metl-Span, "thermalSafe" insulated metal panels.
UL design #050, 1, 2 or 3 hour rated. specified the product but the project got axed due to the economy so no more info. |
|
4specs.com Home Page