NanaWall

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Ronald J. Ray, RA, CCS, CCCA Senior Member Username: rjray Post Number: 99 Registered: 04-2004 Posted on Friday, May 25, 2012 - 10:32 am:    I am searching for comparable manufactures for NanaWall’s aluminum framed glazed system. Any help with identifying other manufacturers would be greatly appreciated. Thanks. Ron Liz O'Sullivan Senior Member Username: liz_osullivan Post Number: 51 Registered: 10-2011 Posted on Friday, May 25, 2012 - 10:41 am:    Ron, if it's for exterior use I don't know of any. But if it's for interior use, some of the operable partition manufacturers have glazed operable partitions. Colin Gilboy Senior Member Username: colin Post Number: 302 Registered: 09-2005 Posted on Friday, May 25, 2012 - 10:53 am:    Look over the manufacturers listed here: http://www.4specs.com/s/08/08-3500.html Goldbrecht and Solar Innovations appear to have similar products and Grabill has aluminum clad systems. Colin Gilboy Publisher, 4specs.com 435.654.5775 - Utah 800.369.8008 Robin E. Snyder Senior Member Username: robin Post Number: 404 Registered: 08-2004 Posted on Friday, May 25, 2012 - 11:35 am:    I have had good luck with these guys: http://panda-windows.com/ The Vegas rep is Sharon - sharon@panda-windows.com. She may be able to help you or refer you to your local rep. Lisa Goodwin Robbins, RA, CCS, LEED ap Senior Member Username: lgoodrob Post Number: 176 Registered: 08-2004 Posted on Friday, May 25, 2012 - 01:27 pm:    Here in NE, Solar Innovations is coming in with lower bids and taking some of the work from NanaWall. I have recently torn out magazine pages for Panda Windows and LaCantina Doors. They seem to make similar products, but I haven't had time to research them yet. - Ronald L. Geren, AIA, CSI, CCS, CCCA, SCIP Senior Member Username: specman Post Number: 1014 Registered: 03-2003 Posted on Friday, May 25, 2012 - 01:35 pm:    Hey all: Just to let you know, Robin Snyder passed her bar exam and is now a full-fledged attorney. Congratulations! Now, let the jokes begin... Ron Geren, AIA, CSI, CCS, CCCA, SCIP www.specsandcodes.com Anne Whitacre, FCSI CCS Senior Member Username: awhitacre Post Number: 1264 Registered: 07-2002 Posted on Friday, May 25, 2012 - 01:50 pm:    okay. why don't sharks eat attorneys? professional courtesy. Lynn Javoroski FCSI CCS LEED® AP SCIP Affiliate Senior Member Username: lynn_javoroski Post Number: 1484 Registered: 07-2002 Posted on Friday, May 25, 2012 - 01:55 pm:    Congratulations, Robin! Seriously, I did know one honest attorney - a long time ago, in a galaxy far away - and he's dead now. Maybe you'll take his place? Lisa Goodwin Robbins, RA, CCS, LEED ap Senior Member Username: lgoodrob Post Number: 177 Registered: 08-2004 Posted on Friday, May 25, 2012 - 02:09 pm:    Congratulations Robin! ken hercenberg Senior Member Username: khercenberg Post Number: 253 Registered: 12-2006 Posted on Friday, May 25, 2012 - 05:34 pm:    When visiting Williamsburg, VA many years ago my nephew ran over and said that he found a grave with two people. We ran over and sure enough the tombstone read "Here lies a lawyer and an honest man". Robin E. Snyder Senior Member Username: robin Post Number: 405 Registered: 08-2004 Posted on Friday, May 25, 2012 - 06:11 pm:    yeah, yeah, bring 'em on. You should see my law school facebook page - tons of lawyer jokes there! Thanks for the shout out Ron! Now you all know what I have been up to with all my spare time! Phil Kabza Senior Member Username: phil_kabza Post Number: 506 Registered: 12-2002 Posted on Saturday, May 26, 2012 - 09:31 am:    An attorney who knows how to read specs! What could be more dangerous than that? Architects: Run not walk to your liability insurance agent and lower your deductibles!