4specs.com    4specs.com Home Page

Delta Fassade-S Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #5 » Delta Fassade-S « Previous Next »

Author Message
Liz O'Sullivan
Senior Member
Username: liz_osullivan

Post Number: 41
Registered: 10-2011


Posted on Tuesday, May 01, 2012 - 05:15 pm:   Edit PostDelete PostPrint Post

Does anyone have thoughts on Fassade-S by Delta?
http://www.cosella-dorken.com/bvf-ca-en/products/wall_ext/wrb_open-joint/products/fassade-s.php
The application is open-joint wood siding, pretty much like the image in the link.
Phil Kabza
Senior Member
Username: phil_kabza

Post Number: 504
Registered: 12-2002


Posted on Wednesday, May 02, 2012 - 06:17 am:   Edit PostDelete PostPrint Post

The emphasis in the marketing language is the "extreme UV resistance" of the product. However, there is no test data listed that supports the claim.

The ICC-ES report only addresses the application of this product as a water-resistive barrier that requires a code-compliant cladding applied over it; therefore, the ICC-ES report does not support the application described in the marketing literature, which is that the product is essentially serving as the building cladding with some type of decorative non-weather-barrier material applied over at least 60 percent of it.

The UV resistance is apparently derived from an acrylic coating applied to a PET substrate. It seems like a lot to ask of an acrylic coating. It might be interesting to use it in a small decorative application in an area not exposed to a lot of sunlight (and not too hard to fix later if its life expectancy doesn't pan out).
Liz O'Sullivan
Senior Member
Username: liz_osullivan

Post Number: 43
Registered: 10-2011


Posted on Wednesday, May 02, 2012 - 11:20 am:   Edit PostDelete PostPrint Post

Thanks so much, Phil.
John Bunzick, CCS, CCCA, LEED AP
Senior Member
Username: bunzick

Post Number: 1388
Registered: 03-2002
Posted on Wednesday, May 02, 2012 - 03:50 pm:   Edit PostDelete PostPrint Post

This product appears to be aimed at the weather barrier for use with Trespa and similar open-joint rain-screen claddings. Have never seen it our used it before myself.
ken hercenberg
Senior Member
Username: khercenberg

Post Number: 207
Registered: 12-2006
Posted on Wednesday, May 02, 2012 - 04:20 pm:   Edit PostDelete PostPrint Post

We've received feedback from other manufacturers of similar products that we should not expect these products to retain their color if left exposed. There was also significant concern that weathering will result in erosion of the surface and, ultimately, the product.

Essentially we were told to expect it to begin to fail in about 5 years or so.

I'd look to get a statement from the manufacturer regarding suitability of use in this application, preferably with some form of warranty.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration