4specs.com    4specs.com Home Page

rated (90 minute) frame Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #5 » rated (90 minute) frame « Previous Next »

Author Message
Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 1423
Registered: 07-2002


Posted on Tuesday, April 03, 2012 - 01:11 pm:   Edit PostDelete PostPrint Post

Does anyone know of a wood or wood-look 90 minute rated door frame?
Melissa J. Aguiar, CSI, CCS, SCIP
Senior Member
Username: melissaaguiar

Post Number: 144
Registered: 12-2003
Posted on Tuesday, April 03, 2012 - 01:26 pm:   Edit PostDelete PostPrint Post

http://www.algomahardwoods.com/AHW%20Pages/technicaldata.html

http://www.marshfielddoors.com/stile/specialty.html#special


http://www.flemingdoor.com/en/site/fleming/Products/Specialty-products/

http://www.flemingdoor.com/Other/Fleming/Support%20material/Fleming%20Specialty%20Door%20Brochure_rev0611_lr.pdf

http://totaldoor.com/systems/firesmoke
Melissa J. Aguiar, CSI, CCS, SCIP
Nathan Woods, CSI, CCCA, LEED AP
Senior Member
Username: nwoods

Post Number: 438
Registered: 08-2005


Posted on Tuesday, April 03, 2012 - 01:31 pm:   Edit PostDelete PostPrint Post

http://www.trustile.com/catalog/firedoors/?series=0
(scroll down a bit)
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 513
Registered: 01-2008


Posted on Tuesday, April 03, 2012 - 01:45 pm:   Edit PostDelete PostPrint Post

Lynn,

I have specified stile and rail doors from the following source. Design required stile and rail. They may have flush also.

1. 20-Minute Rated Doors and Frames: Lag Design, Industrial Millwork Corporation.. Toll Free [800] 462-3667.
a. Model Number: D-82.

2. 60-Minute Rated Doors and Frames: Lag Design, Industrial Millwork Corporation.. Toll Free [800] 462-3667.
a. Model Number: D-82.

3. 90-Minute Rated Doors and Frames: Lag Design, Industrial Millwork Corporation.. Toll Free [800] 462-3667.
a. Model Number: D-82.

To additional sources are:
a. Dimensions Millwork.
b. Karona.

I cannot remember if these offered 90 minute doors. This was back in April 2003.

Please share what you find.

Wayne
Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 1424
Registered: 07-2002


Posted on Tuesday, April 03, 2012 - 02:43 pm:   Edit PostDelete PostPrint Post

TruStile, Lag Design, Maiman, Warm Springs Composite Products, and maybe TGP (can't find it on their website, but it's been spec'd for a project), all offer a 90 minute wood or wood-look door frame (and I have visual proof from their websites). Since this is for a Ronald McDonald wing in a hospital, we're also going for a stile-and-rail door. It's gonna look good. Thanks for your help. Once again, it's all in who you know - your friends.
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 514
Registered: 01-2008


Posted on Tuesday, April 03, 2012 - 02:48 pm:   Edit PostDelete PostPrint Post

Lynn,

Your wish is our command.

Wayne
Randall A Chapple, AIA, SE, CCS, LEED AP
Senior Member
Username: rachapple

Post Number: 52
Registered: 12-2005
Posted on Wednesday, April 04, 2012 - 04:39 pm:   Edit PostDelete PostPrint Post

Lynn,

Just remember that what you see is what you get. The designers cannot make any changes to the frame profiles.
Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 1425
Registered: 07-2002


Posted on Wednesday, April 04, 2012 - 04:41 pm:   Edit PostDelete PostPrint Post

Thanks, Randy. I'll be sure to point that out to the Architect.

By the way, Eggers Industries also makes a 90 minute frame.
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 515
Registered: 01-2008


Posted on Wednesday, April 04, 2012 - 04:57 pm:   Edit PostDelete PostPrint Post

Lynn,

I feel a song coming on.

No, you can't always get what you want
You can't always get what you want
You can't always get what you want
But if you try sometimes, you just might find
You get what you need
Paul Gerber
Senior Member
Username: paulgerber

Post Number: 94
Registered: 04-2010


Posted on Wednesday, April 04, 2012 - 04:59 pm:   Edit PostDelete PostPrint Post

WOW!! Did you just make that up Wayne?? Canadian songwriting talent at its finest folks!! ;)
Ride it like you stole it!!!
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 516
Registered: 01-2008


Posted on Wednesday, April 04, 2012 - 05:09 pm:   Edit PostDelete PostPrint Post

You Can't Always Get What You Want- The Rolling Stones, Let it Bleed, 1969.

Were you born or out of diapers in 1969?
Paul Gerber
Senior Member
Username: paulgerber

Post Number: 97
Registered: 04-2010


Posted on Wednesday, April 04, 2012 - 05:15 pm:   Edit PostDelete PostPrint Post

That was sarcasm eh?

(and for the record, yes I was out of diapers in 1969 (I am very trainable, although my ex-wife's opinion on that may differ)...I was a Centennial project eh, but I missed by 23.5 hours or so...yes my ex-pat friend, that is a math test for this fine Wednesday afternoon to see if you can determine my birth date and time :P)
Ride it like you stole it!!!
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 517
Registered: 01-2008


Posted on Wednesday, April 04, 2012 - 05:25 pm:   Edit PostDelete PostPrint Post

I would say you were born at 12:30 a.m., December 31, 1966, or so.

or 11:30 p.m. on January 1, 1968, or so.

How was Panarama in Jan.

I make it to Sunshine Village near Banff in February 26th.
Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 1426
Registered: 07-2002


Posted on Wednesday, April 04, 2012 - 05:29 pm:   Edit PostDelete PostPrint Post

Wayne, Thanks so much for the ear worm!

I'm not even going to try for the birth date; suffice it to say that I was in college (or had graduated some time around there).
Paul Gerber
Senior Member
Username: paulgerber

Post Number: 98
Registered: 04-2010


Posted on Wednesday, April 04, 2012 - 05:34 pm:   Edit PostDelete PostPrint Post

I said 23.5 HOURS bud!! I see math isn't your strong suit! LOL

Panorama was AWESOME!! Almost knee deep powder on the Wednesday morning made for some great skiing!! We skied 6 days straight (half of Sun on arrival and until about 2:00 Friday afternoon before we left). Great conditions all week!

Ran into 2 guys in Cowtown on the return trip that had been at Kicking Horse...Golden got 5'-0" of snow that week, and they still had a 8" to 12" covering on the roof of their rental car when they pulled into the hotel!! LOL

Had the bike out on March 17 in mid-70's weather and got abut 100km in...would have gotten more in before and after that but was working INSANE hours so didn't know what it would be like riding home in the late evening or early morning hours so decided to keep caging. Should be back out this weekend...14C and sunny on Saturday!! YEAH


Oh btw Lynn and everyone else...sorry for temporarily hijacking your thread...back to fire-rated wood frames now!!
Ride it like you stole it!!!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration