4specs.com    4specs.com Home Page

Multi-Display Video Wall Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Specifications Discussions #5 » Multi-Display Video Wall « Previous Next »

Author Message
David E Lorenzini
Senior Member
Username: deloren

Post Number: 154
Registered: 04-2000


Posted on Tuesday, May 27, 2014 - 02:15 pm:   Edit PostDelete PostPrint Post

I need some guidance on creating a new section on a multi-display video wall for an office lobby. The closest MF number/title I could find is Section 101143 - Visual Display Wall Panels. If anyone has had experience with this type of section, or knows where I could find one, I would appreciate a copy, or lead. Email is deloren@scip.com.
David Lorenzini, FCSI, CCS
Architectural Resources Co.
Robert E. Woodburn, AIA, CSI, CCS, CCCA
Senior Member
Username: bob_woodburn

Post Number: 79
Registered: 11-2010
Posted on Tuesday, May 27, 2014 - 02:34 pm:   Edit PostDelete PostPrint Post

My experience has been with LED display signage & marquees (and long enough ago--over 12 years--for my knowledge to be obsolete), but I suspect that's not what you're referring to. Is this?
http://www.cinemassive.com/pdf/CineMassive-CineView-II-Video-Wall.pdf
David E Lorenzini
Senior Member
Username: deloren

Post Number: 155
Registered: 04-2000


Posted on Tuesday, May 27, 2014 - 03:37 pm:   Edit PostDelete PostPrint Post

Bob, That is exactly what I'm looking for. We have twenty 55-inch units with minimal bezel widths in a 5 wide by 4 high arrangment that integrates into a single display. I checked with a manufacturer and a A/V consultant, but no one has a guide spec. I'll check with the manufacturer in your reference.
David Lorenzini, FCSI, CCS
Architectural Resources Co.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration