| Author |
Message |
Jeff Williams RA
Senior Member
Username: architectjw
Post Number: 10
Registered: 10-2013
| | Posted on Monday, April 14, 2014 - 01:32 pm: |    |
I have a project that I need to repaint the existing exterior steel ships ladders and other steel items. SpecLink doesn't appear to have a section that covers surface perpetration for existing conditions. I would assume this would go in division 099000. Is there any standards I could borrow from so I can cover all the bases? |
Wayne Yancey
Senior Member
Username: wayne_yancey
Post Number: 638
Registered: 01-2008
| | Posted on Monday, April 14, 2014 - 01:38 pm: | |
Jeff,
Go the MPI website at www.paintinfo.com. There you will find specifications for repainting. If you cannot find, e-mail me at wayne.yancey@callison.com
Wayne |
Jeff Williams RA
Senior Member
Username: architectjw
Post Number: 11
Registered: 10-2013
| | Posted on Monday, April 14, 2014 - 02:08 pm: | |
Thanks Wayne, I found it. I appreciate the info.
Jeff |
Richard L Matteo, AIA, CSI, CCS
Senior Member
Username: rlmat
Post Number: 645
Registered: 10-2003
| | Posted on Monday, April 14, 2014 - 06:30 pm: | |
Jeff - you may also want to check The Society for Protective Coatings (SSPC). They have the standards for the different levels of preparation.
Also, depending on which paint manufacturer you are proposing to use, they have specific recommendations on the prep for the products to be specified. |
4specs.com Home Page