| Author |
Message |
Robin E. Snyder
Senior Member
Username: robin
Post Number: 469
Registered: 08-2004
| | Posted on Monday, October 07, 2013 - 11:23 pm: |    |
Has anyone worked with a good product rep that can assist with my Stone Repair spec? I am using Masterspecs's section, but I have never written a spec for stone repair and am not sure what I am doing. Any referrals would be appreciated! |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 618
Registered: 12-2006
| | Posted on Tuesday, October 08, 2013 - 07:08 am: | |
Robin, the two best companies I've found are Cathedral Stone, makers of Jahn Mortars (probably the best in the US) and Edison Coatings (very good second best). Neil Savitch, the Edison rep in Virginia, is an incredible resource. I'd be happy to send you his contact info. Unfortunately I don't know who to reach out to on your side of the country. Still, if you call either of these companies, they are usually very hands-on and supportive. Good luck! |
Robin E. Snyder
Senior Member
Username: robin
Post Number: 470
Registered: 08-2004
| | Posted on Tuesday, October 08, 2013 - 11:50 am: | |
Thanks Ken. I should have mentioned the project is at Penn State, so if you can forward the info for Neil (email If you have it - I currently don't have a voice). I appreciate it! robin@spectraspecs.com |
Dale Roberts CSI, CCPR, CTC, LEED Green Associate
Senior Member
Username: dale_roberts_csi
Post Number: 109
Registered: 10-2005
| | Posted on Tuesday, October 08, 2013 - 12:46 pm: | |
Hi Robin,
You should also contact the Marble Institute of America http://www.marble-institute.com/
Technical director Chuck Muehlbauer. |
Jeffrey Leemhuis, AIA, CSI, CCS, LEED-AP, SCIP Affiliate
Senior Member
Username: jrlbarch
Post Number: 32
Registered: 07-2005
| | Posted on Wednesday, October 09, 2013 - 01:29 pm: | |
Robin, I belive the Cathedral Stone rep for that area is Aaron Wolk, (724) 624-0774 |
|
4specs.com Home Page