Australia?

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Robin E. Snyder Senior Member Username: robin Post Number: 439 Registered: 08-2004 Posted on Tuesday, November 06, 2012 - 10:41 am:    Anyone written specs for projects in Australia? Am trying to learn if they use CSI format, ASTM standards etc. As always, thanks in advance for your input! Ralph Liebing, RA, CSI, CDT Senior Member Username: rliebing Post Number: 1354 Registered: 02-2003 Posted on Tuesday, November 06, 2012 - 11:01 am:    Try http://www.natspec.com.au/ David E Lorenzini Senior Member Username: deloren Post Number: 134 Registered: 04-2000 Posted on Tuesday, November 06, 2012 - 11:37 am:    Robin, you should also contact Peter Kelly, a SCIP member in Melbourne. His work includes some of the tallest buildings in Melbourne. David Lorenzini, FCSI, CCS Architectural Resources Co. John Regener, AIA, CCS, CCCA, CSI, SCIP Senior Member Username: john_regener Post Number: 593 Registered: 04-2002 Posted on Tuesday, November 06, 2012 - 12:40 pm:    http://www.masterbuilders.asn.au/building-and-planning/australian-standards Colin Gilboy Senior Member Username: colin Post Number: 327 Registered: 09-2005 Posted on Tuesday, November 06, 2012 - 12:46 pm:    http://www.masterbuilders.com.au/ perhaps better domain, but cannot find the specific page listed. Colin Gilboy Publisher, 4specs.com 435.654.5775 - Utah 800.369.8008 Ron Beard CCS Senior Member Username: rm_beard_ccs Post Number: 397 Registered: 10-2002 Posted on Tuesday, November 06, 2012 - 03:16 pm:    Robin: If you are looking for volunteers for a field trip, please add me to your list. Ron "Fast is good, but accurate is better." .............Wyatt Earp Jerome J. Lazar, RA, CCS, CSI, SCIP Senior Member Username: lazarcitec Post Number: 948 Registered: 05-2003 Posted on Tuesday, November 06, 2012 - 09:29 pm:    I agree with Ron a Field Trip to Melbourne sounds like a great idea, perhaps Colin can organize it as the first ever 4specs.com specwriter exchange, some of theirs for some of ours. Lars Hubbard Member Username: larshubb Post Number: 3 Registered: 06-2007 Posted on Tuesday, November 13, 2012 - 08:47 am:    Robin I set up the Australian office of the UK spec consultancy I used to be part of. We set up an entire master, using ANZ (Australia/New Zealand) standards with a liberal sprinkling of British Standards. There is a national master specification, called NatSpec, but is it not the greatest... you can check it out at http://www.natspec.com.au If we can help in any way, please let me know. Lars Robin E. Snyder Senior Member Username: robin Post Number: 441 Registered: 08-2004 Posted on Tuesday, November 13, 2012 - 09:50 am:    Lars - can you email me your contact info - i would like to chat with you. Thanks, robin@spectraspecs.com