4specs.com    4specs.com Home Page

Floor Flatness and Levelness per ASTM... Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive Coffee Pot and Water Cooler » Floor Flatness and Levelness per ASTM E 1155 « Previous Next »

Author Message
Harry Peck, CSI, CCS
Senior Member
Username: harryspec

Post Number: 12
Registered: 05-2010

Posted on Friday, May 13, 2011 - 10:46 am:   Edit PostDelete PostPrint Post

If ASTM E 1155 measures within boundry of a pour and excludes going accross any construction joints, how wrong would I be to require a good old straight edge measurements accross areas excluded by ASTM E 1155?
Lynn Javoroski CSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 1251
Registered: 07-2002

Posted on Tuesday, May 17, 2011 - 02:32 pm:   Edit PostDelete PostPrint Post

depends on what you want to accomplish. from what I know, the "good old straight edge" is insufficient and full of errors.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration