4specs.com    4specs.com Home Page

ADA locker lock Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #4 » ADA locker lock « Previous Next »

Author Message
David Axt, AIA, CCS, CSI
Senior Member
Username: david_axt

Post Number: 1207
Registered: 03-2002


Posted on Tuesday, June 21, 2011 - 02:49 pm:   Edit PostDelete PostPrint Post

I need to specify an ADA compliant lock for a standard metal athletic locker in a pool locker room. Keyed or tumbler turn combination locks are not ADA compliant.

Any suggestions?
Sheldon Wolfe
Senior Member
Username: sheldon_wolfe

Post Number: 498
Registered: 01-2003


Posted on Tuesday, June 21, 2011 - 02:51 pm:   Edit PostDelete PostPrint Post

Digilock
Lynn Javoroski CSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 1268
Registered: 07-2002


Posted on Tuesday, June 21, 2011 - 03:01 pm:   Edit PostDelete PostPrint Post

Their button operated locks - good choice from what I know. Push buttons should work, too, as long as there's no twisting or hard pulling to open the lock after unlocking. But I think Sheldon's suggestion is the best.

When I was doing ADA surveys, the criteria we used involved holding a pencil in the fist. If the article could be operated with the eraser end of the pencil, it was probably OK.
Nathan Woods, CCCA, LEED AP
Senior Member
Username: nwoods

Post Number: 390
Registered: 08-2005


Posted on Tuesday, June 21, 2011 - 03:04 pm:   Edit PostDelete PostPrint Post

1. I would not reccommend metal lockers in a pool locker room due to corrosion.
2. Digilock as Sheldon has said
3. Be sure to specify the proper internal closure bracket that accomodates the digilock. It is different than the non-digilock equipped lockers.
Colin Gilboy
Senior Member
Username: colin

Post Number: 268
Registered: 09-2005


Posted on Tuesday, June 21, 2011 - 03:05 pm:   Edit PostDelete PostPrint Post

http://www.digilock.com/

This and other locker locks and accessories are in:
http://www.4specs.com/s/10/10-5190.html
Colin Gilboy
Publisher, 4specs.com
435.654.5775 - Utah
800.369.8008
David Axt, AIA, CCS, CSI
Senior Member
Username: david_axt

Post Number: 1208
Registered: 03-2002


Posted on Tuesday, June 21, 2011 - 05:25 pm:   Edit PostDelete PostPrint Post

The Zephyr lock really looks promising. Digilock does not recommend their lock in pool areas.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration