4specs.com    4specs.com Home Page

Vehicle Crash Barriers Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #4 » Vehicle Crash Barriers « Previous Next »

Author Message
Richard A. Rosen, CSI, CCS, AIA
Senior Member
Username: rarosen

Post Number: 101
Registered: 08-2006


Posted on Friday, June 10, 2011 - 10:00 am:   Edit PostDelete PostPrint Post

I have spent tihe last 1 1/2 hours searching for products and specifications for DOC K12 certified rising beam crash barriers. Product information is available but specs are sorely lacking. If you have a spec and product recommendations it would be greatly appreciated if you would forward to me at rrosen@bh-ba.com
Ronald L. Geren, AIA, CSI, CCS, CCCA, SCIP
Senior Member
Username: specman

Post Number: 955
Registered: 03-2003


Posted on Friday, June 10, 2011 - 10:12 am:   Edit PostDelete PostPrint Post

I think you mean DOS (Department of State).

Here's the link to the Unified Facilities Guide Specification for active vehicle barrier, which mentions the various DOS K designations: http://www.wbdg.org/ccb/DOD/UFGS/UFGS%2034%2071%2013.19.pdf
Ron Geren, AIA, CSI, CCS, CCCA, SCIP
www.specsandcodes.com

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration