4specs.com    4specs.com Home Page

Boyd Aluminum Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #4 » Boyd Aluminum « Previous Next »

Author Message
Steve Gantner, CSI, CCS, CCCA
Senior Member
Username: sgantner

Post Number: 32
Registered: 08-2007
Posted on Monday, June 06, 2011 - 02:35 pm:   Edit PostDelete PostPrint Post

I just met briefly with a product representative who works for Boyd Aluminum Manufacturing Company. Their product sounds fine, but this is the first I have heard of them. That's not saying a lot because I'm sure there are plenty of companies that I have not heard of.

My question for all of you valued 4 Specs posters is this....

What has your experience been with Boyd Alumunum and was the Owner happy with the end result?

Thanks for your comments.
Richard L Matteo, AIA, CSI, CCS
Senior Member
Username: rlmat

Post Number: 419
Registered: 10-2003
Posted on Tuesday, June 07, 2011 - 11:58 am:   Edit PostDelete PostPrint Post

Steve - I've never heard of them either.
Where are they located and what do they produce?
Steve Gantner, CSI, CCS, CCCA
Senior Member
Username: sgantner

Post Number: 33
Registered: 08-2007
Posted on Tuesday, June 07, 2011 - 03:51 pm:   Edit PostDelete PostPrint Post

Richard, according to their literature they are a "Section 8520 Aluminum Window Specialists". The plant is located in Springfield, Missouri.
Richard L Matteo, AIA, CSI, CCS
Senior Member
Username: rlmat

Post Number: 420
Registered: 10-2003
Posted on Wednesday, June 08, 2011 - 01:16 pm:   Edit PostDelete PostPrint Post

I looked up their website and they been in business for a long time. They appear to be up to speed on current technology. Since they're based in Missouri, I haven't had any direct experience with them.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration