4specs.com    4specs.com Home Page

Diamond Finish Concrete Floors Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #3 » Diamond Finish Concrete Floors « Previous Next »

Author Message
Robin E. Snyder
Senior Member
Username: robin

Post Number: 111
Registered: 08-2004
Posted on Monday, June 04, 2007 - 11:56 pm:   Edit PostDelete PostPrint Post

Has anyone specified this type of finish? If so, would you be willing to share any verbage, resources etc.? Thanks - Robin@spectraspecs.com
Lynn Javoroski CSI CCS LEED™ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 588
Registered: 07-2002
Posted on Tuesday, June 05, 2007 - 09:35 am:   Edit PostDelete PostPrint Post

I've spec'd Retroplate and polished, but I'm unfamiliar with Diamond Finish.
William C. Pegues, FCSI, CCS
Senior Member
Username: wpegues

Post Number: 666
Registered: 10-2002
Posted on Tuesday, June 05, 2007 - 09:42 am:   Edit PostDelete PostPrint Post

Is this a specific product? If not, generically it is somewhat meaningless as diamonds embedded in polishing disks is quite common. It does not lead to a specific level of finish.

But some product may refer to this as part of its name and mean a high quality finish.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration