Solid Plastic Partitions and Lockers

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Ralph Liebing, RA, CSI Senior Member Username: rliebing Post Number: 461 Registered: 02-2003 Posted on Wednesday, September 27, 2006 - 11:23 am:    Would appreciate any single source references for these products other than Santana/ComTec. Thanks for your help! Brett M. Wilbur CSI, CCS, AIA Senior Member Username: brett Post Number: 142 Registered: 12-2004 Posted on Wednesday, September 27, 2006 - 11:40 am:    1. Accurate Partitions Corp., Lyons, IL 2. Ampco Products, Inc., Sanger, TX 3. General Partitions Mfg. Corp., Erie, PA 4. Global Steel Products Corp., Deer Park, NY 5. Sanymetal, A Crane Plumbing Company, Somerset, KY Richard L Matteo, AIA, CSI, CCS Senior Member Username: rlmat Post Number: 176 Registered: 10-2003 Posted on Wednesday, September 27, 2006 - 11:54 am:    Mills Partitions by Bradley, Menomonee Falls, WI Columbia Partitions of South Carolina Ralph - any particular problem with Santana/Comtec? Ralph Liebing, RA, CSI Senior Member Username: rliebing Post Number: 462 Registered: 02-2003 Posted on Wednesday, September 27, 2006 - 12:29 pm:    Richard, we have found that their merger is incomplete and both companies are in quite disarray, and uncoordinated in regard to being helpful with information, etc. Lynn Javoroski CSI CCS LEED AP SCIP Affiliate Senior Member Username: lynn_javoroski Post Number: 424 Registered: 07-2002 Posted on Wednesday, September 27, 2006 - 03:33 pm:    Try The Young Group (I posted before and don't know if it went through, new computer and all cookies are gone): http://www.designrite.net/ They are trespa. Jennifer Young, CSI, CDT, MAI Senior Member Username: jenn Post Number: 8 Registered: 04-2006 Posted on Wednesday, September 27, 2006 - 03:43 pm:    You can also contact ShowerShapes.com in California - they specialize in solid surface partitons, not quite like plastic, but if you have budget it can be worth it from the life cycle cost standpoint (Unregistered Guest) Unregistered guest Posted on Wednesday, September 27, 2006 - 03:28 pm:    Take a look at The Young Group: http://www.designrite.net/ M. Keith West, CSI, CDT (Unregistered Guest) Unregistered guest Posted on Saturday, December 09, 2006 - 05:46 pm:    Add Rockville Partitions. They are a division of General Partitions and they specialize in solid plastic. They are located in Pisgah, Alabama. Wayne Yancey Senior Member Username: wyancey Post Number: 236 Registered: 05-2005 Posted on Monday, December 11, 2006 - 12:02 pm:    Ralph, I have done toilet partitions in men's and women's restrooms with DuPont Corian plus wainscots in Corian. Never did lockers with Corian but don't let the cost scare you. Wayne Phil Kabza Senior Member Username: phil_kabza Post Number: 226 Registered: 12-2002 Posted on Wednesday, December 13, 2006 - 12:44 am:    I've had good success with Columbia and with Mills/Bradley. I specify upgraded institutional hardware with these units typically, for middle and high school environments.