4specs.com    4specs.com Home Page

Solid Plastic Partitions and Lockers Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #3 » Solid Plastic Partitions and Lockers « Previous Next »

Author Message
Ralph Liebing, RA, CSI
Senior Member
Username: rliebing

Post Number: 461
Registered: 02-2003
Posted on Wednesday, September 27, 2006 - 11:23 am:   Edit PostDelete PostPrint Post

Would appreciate any single source references for these products other than Santana/ComTec.

Thanks for your help!
Brett M. Wilbur CSI, CCS, AIA
Senior Member
Username: brett

Post Number: 142
Registered: 12-2004
Posted on Wednesday, September 27, 2006 - 11:40 am:   Edit PostDelete PostPrint Post

1. Accurate Partitions Corp., Lyons, IL
2. Ampco Products, Inc., Sanger, TX
3. General Partitions Mfg. Corp., Erie, PA
4. Global Steel Products Corp., Deer Park, NY
5. Sanymetal, A Crane Plumbing Company, Somerset, KY
Richard L Matteo, AIA, CSI, CCS
Senior Member
Username: rlmat

Post Number: 176
Registered: 10-2003
Posted on Wednesday, September 27, 2006 - 11:54 am:   Edit PostDelete PostPrint Post

Mills Partitions by Bradley, Menomonee Falls, WI
Columbia Partitions of South Carolina

Ralph - any particular problem with Santana/Comtec?
Ralph Liebing, RA, CSI
Senior Member
Username: rliebing

Post Number: 462
Registered: 02-2003
Posted on Wednesday, September 27, 2006 - 12:29 pm:   Edit PostDelete PostPrint Post

Richard, we have found that their merger is incomplete and both companies are in quite disarray, and uncoordinated in regard to being helpful with information, etc.
Lynn Javoroski CSI CCS LEED AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 424
Registered: 07-2002
Posted on Wednesday, September 27, 2006 - 03:33 pm:   Edit PostDelete PostPrint Post

Try The Young Group (I posted before and don't know if it went through, new computer and all cookies are gone): http://www.designrite.net/ They are trespa.
Jennifer Young, CSI, CDT, MAI
Senior Member
Username: jenn

Post Number: 8
Registered: 04-2006
Posted on Wednesday, September 27, 2006 - 03:43 pm:   Edit PostDelete PostPrint Post

You can also contact ShowerShapes.com in California - they specialize in solid surface partitons, not quite like plastic, but if you have budget it can be worth it from the life cycle cost standpoint
(Unregistered Guest)
Unregistered guest
Posted on Wednesday, September 27, 2006 - 03:28 pm:   Edit PostDelete PostPrint Post

Take a look at The Young Group:
http://www.designrite.net/
M. Keith West, CSI, CDT (Unregistered Guest)
Unregistered guest
Posted on Saturday, December 09, 2006 - 05:46 pm:   Edit PostDelete PostPrint Post

Add Rockville Partitions. They are a division of General Partitions and they specialize in solid plastic. They are located in Pisgah, Alabama.
Wayne Yancey
Senior Member
Username: wyancey

Post Number: 236
Registered: 05-2005
Posted on Monday, December 11, 2006 - 12:02 pm:   Edit PostDelete PostPrint Post

Ralph,

I have done toilet partitions in men's and women's restrooms with DuPont Corian plus wainscots in Corian.

Never did lockers with Corian but don't let the cost scare you.

Wayne
Phil Kabza
Senior Member
Username: phil_kabza

Post Number: 226
Registered: 12-2002
Posted on Wednesday, December 13, 2006 - 12:44 am:   Edit PostDelete PostPrint Post

I've had good success with Columbia and with Mills/Bradley. I specify upgraded institutional hardware with these units typically, for middle and high school environments.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration