4specs.com    4specs.com Home Page

MasterWorks 7.0 vs. 6.3? Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Computers, the Internet and Networking » MasterWorks 7.0 vs. 6.3? « Previous Next »

Author Message
David Axt, AIA, CCS, CSI
Senior Member
Username: david_axt

Post Number: 1294
Registered: 03-2002


Posted on Friday, April 20, 2012 - 01:55 pm:   Edit PostDelete PostPrint Post

What is the difference between Arcom's MasterWorks 7.0 and the previous version 6.3?

Those of you that are using 7.0, how do you like it?
guest (Unregistered Guest)
Unregistered guest
Posted on Friday, April 20, 2012 - 06:16 pm:   Edit PostDelete PostPrint Post

Installed then uninstalled; reverted back to 6.1...couldn't reinstall 6.3 (key did not work).

My 6.3 was working fine, but was having trouble with gyp bd master; MW6.3 kept freezing. thought it was MW but 7.0 froze on same master section. SpecAgent in 7.0 seemed to keep popping up differently than 6.3. Only had installed for a few hours.

Noticed that it added SpecText toolbar
Jeffrey Wilson CSI CCS
Senior Member
Username: wilsonconsulting

Post Number: 63
Registered: 03-2006
Posted on Saturday, April 21, 2012 - 10:33 am:   Edit PostDelete PostPrint Post

I have been using 7.0 for a couple weeks. Upgraded on advice from ARCOM because of a glitch that developed in 6.3. New version works the same as the old. No learning curve, just a few added features in the toolbar -- mostly related to SpecText.

One new feature I can use is an one-click insert for IP/metric dimensions.

Add Your Message Here
Post:
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration