4specs.com    4specs.com Home Page

Roof Paver Pedestal with Dade Co Prod... Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Product Discussions #2 » Roof Paver Pedestal with Dade Co Product Approval « Previous Next »

Author Message
Jerome J. Lazar, RA, CCS, CSI, SCIP
Senior Member
Username: lazarcitec

Post Number: 153
Registered: 05-2003
Posted on Friday, September 09, 2005 - 12:52 pm:   Edit PostDelete PostPrint Post

Any one know of a roof paver on pedestal system that has Miami-Dade County Product Approval?
Doug Brinley AIA CSI CDT CCS
Senior Member
Username: dbrinley

Post Number: 107
Registered: 12-2002
Posted on Friday, September 09, 2005 - 01:02 pm:   Edit PostDelete PostPrint Post

I think Bison Screwjack does. www.BisonDeckSupports.com
Richard L Matteo, AIA, CSI, CCS
Senior Member
Username: rlmat

Post Number: 112
Registered: 10-2003
Posted on Friday, September 09, 2005 - 01:23 pm:   Edit PostDelete PostPrint Post

Try Roofblok Limited - They make interlocking roof ballast pavers

Contact Information
Telephone
(800) 309-4344
FAX
(978) 952-2790
National Sales Office Postal address
PO Box 728 Leominster, MA 01453
Electronic mail
General Information: info@roofblok.com
Sales: info@roofblok.com
Customer Support: technical@roofblok.com
Jerome J. Lazar, RA, CCS, CSI, SCIP
Senior Member
Username: lazarcitec

Post Number: 154
Registered: 05-2003
Posted on Friday, September 09, 2005 - 04:07 pm:   Edit PostDelete PostPrint Post

Richard - Roof Blok doesn't have Miami-Dade County Product Approval - apparently their system cannot meet the uplift requirements - our client wanted us to use Roof Blok - and this is why we asked the board for suggestions. It is possible that Roof Blok's system could be tested for a one time application and receive that approval by Dade County, but for some reason Roof Blok is not interested - my sources tell me that Hanover may have an approved system...but I am still looking for more feedback and this board is one of the best places to find it - so thanks for your help.
Jerome J. Lazar, RA, CCS, CSI, SCIP
Senior Member
Username: lazarcitec

Post Number: 155
Registered: 05-2003
Posted on Friday, September 09, 2005 - 04:10 pm:   Edit PostDelete PostPrint Post

Ditto to you Doug...will look at your info as well.
John McGrann
Senior Member
Username: jmcgrann

Post Number: 57
Registered: 03-2002
Posted on Friday, September 09, 2005 - 04:41 pm:   Edit PostDelete PostPrint Post

Jerome: None that I know of with pavers on pedistals, but if you want pavers as a finished surface Carlisle has a hot rubberized system with pavers set in a 2-inch mortar bed (Miami-Dade NOA 02-1219.02).
Wayne Yancey
Senior Member
Username: wyancey

Post Number: 60
Registered: 05-2005
Posted on Friday, September 09, 2005 - 06:00 pm:   Edit PostDelete PostPrint Post

Jerome,

If the project requires the look and feel of pavers, you may want to consider the TClear Corporation product (trade names LightGuard, HeavyGuard) but used to be know as Dow Roofmate CT. It is used as part of an IRMA or protected membrane roofing system. The panels can be mechanically fastened using a variety of methods. Living in the Pacfic NW I have no clue if this insulation product is Dade County acceptable.

Manufactured in Hamilton Ohio 1-800-544-7398

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration