4specs.com    4specs.com Home Page

Concrete sealer for existing concrete... Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive - Specifications Discussions #2 » Concrete sealer for existing concrete floor « Previous Next »

Author Message
Betty J Chavira, CSI, CCS, CCCA
Senior Member
Username: bchavira

Post Number: 12
Registered: 01-2003
Posted on Wednesday, April 05, 2006 - 11:13 am:   Edit PostDelete PostPrint Post

Anyone have suggestions for hardening the surface (preventing dusting) of an existing concrete floor. First we'll be removing VCT tile and adhesive. Floor will support electrical equipment which needs to be protected from dust.
Tracy Van Niel
Senior Member
Username: tracy_van_niel

Post Number: 168
Registered: 04-2002
Posted on Wednesday, April 05, 2006 - 11:16 am:   Edit PostDelete PostPrint Post

We always specify L & M Construction Chemicals “Seal Hard” for any floors to be left as exposed concrete. I believe this product can be applied to existing concrete floors as well as new ones, but you should check their website just to make sure.
John Guill
Senior Member
Username: johng

Post Number: 12
Registered: 07-2005
Posted on Monday, April 10, 2006 - 06:04 pm:   Edit PostDelete PostPrint Post

http://www.ashfordformula.com/1.5.html; Cure, seal, hardener suitable for new and existing.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration