| Author |
Message |
Stephen Wilson
Senior Member
Username: swilson
Post Number: 19
Registered: 02-2019
| | Posted on Friday, October 08, 2021 - 08:10 am: |    |
Have any of you ever used Total Flash in your projects before? One of our project team members was asking about it but I've never specified it. Also, is anyone out there aware of any competitors that have similar assembled drainage systems for cavity walls?
https://mortarnet.com/totalflash-panel/ |
Wayne Yancey
Senior Member
Username: wayne_yancey
Post Number: 933
Registered: 01-2008
| | Posted on Friday, October 08, 2021 - 10:03 am: | |
Hi Stephen,
I have specified the Total Flash system for brick veneer masonry cladding on several projects over the past several years without issue and will continue to specify.
Wayne Yancey |
Brian Payne
Senior Member
Username: brian_payne
Post Number: 249
Registered: 01-2014
| | Posted on Friday, October 08, 2021 - 10:23 am: | |
You can also check out https://www.yorkflashings.com/products/flash-vent-stainless-steel/?type=commercial
Just remember that the weep material is great for getting rid of water out of the cavity, but does not replace cavity weeps and vents for the purpose of back venting the brick. |
Wayne Yancey
Senior Member
Username: wayne_yancey
Post Number: 934
Registered: 01-2008
| | Posted on Friday, October 08, 2021 - 10:29 am: | |
Very true but your question was "Have any of you ever used Total Flash in your projects before?"
My answer was: Yes. |
Brian Payne
Senior Member
Username: brian_payne
Post Number: 250
Registered: 01-2014
| | Posted on Friday, October 08, 2021 - 10:32 am: | |
Not sure what you mean Wayne...I was answering Stephen's second question. |
4specs.com Home Page