| Author |
Message |
Loretta Sheridan
Senior Member
Username: leshrdn
Post Number: 230
Registered: 11-2021
| | Posted on Wednesday, May 06, 2026 - 11:58 am: |    |
I am looking for information about security bars for a window. I need to add it to a commercial project, one window. I have no idea how these would be installed. To be honest, I really know nothing about these.
I searched the Forum and only found some thread about security bars in HVAC. |
RH (Hank) Sweers II ALA
Senior Member
Username: rhsweers2
Post Number: 36
Registered: 08-2005
| | Posted on Wednesday, May 06, 2026 - 03:23 pm: | |
My experience is that these are typically custom fabricated per project, though there may be a company out there that has some standard, but customizable units, to fit. And specified in the Metal Fabrications Section.
My "burglar bars" spec for RTU's had 5/8-inch diameter smooth bars at 6-inch-OC each way, welded to an angle frame to anchor them to a substrate. But you might want equivalent size bolts into CMU or concrete, depending on the needs. Add finish, and some installation requirements, and you got it! |
|
4specs.com Home Page