Author |
Message |
David R. Combs, CSI, CCS Unregistered guest
| Posted on Tuesday, April 01, 2003 - 04:50 pm: | |
I am looking for an non-asphaltic, fluid-applied below-grade waterproofing compound (for 0 to 8" below grade, so no real hydrostatic pressure involved), for application directly to concrete surface of grade beam. It also needs to be compatible with EIFS and urethane sealant, as it will also extend up to within contact of the EIFS. If anyone knows of such a product, I would very much appreciate pointing me in the right direction. Thanks |
John Regener, AIA, CCS, CCCA, CSI New member Username: John_regener
Post Number: 79 Registered: 04-2002
| Posted on Tuesday, April 01, 2003 - 08:10 pm: | |
Check out the fluid-applied urethane waterproofing products produced by Pacific Polymers International, Inc. (Elasto-Deck, Elasto-Deck 1000, Elasto-Deck 100% Solids and Elasto-Deck 5000). http://www.pacpoly.com/home/home.html |
David Cline
New member Username: Dcline
Post Number: 5 Registered: 03-2002
| Posted on Tuesday, April 01, 2003 - 08:45 pm: | |
You could look at UPI Sealant Products. They have a wide range of structural waterproofing systems and offer acrylics, urethanes and epoxies. http://www.upiproducts.com/ |
|