Slat Wall

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Sharon Lund Intermediate Member Username: slundsehinccom Post Number: 4 Registered: 09-2003 Posted on Tuesday, January 18, 2005 - 04:55 pm:    What would the MasterFormat number be for slat wall (built into the project - not a display added later). Does anyone have a specification or suggested manufacturer for this product? Tobin Oruch, CDT Senior Member Username: oruch Post Number: 12 Registered: 04-2003 Posted on Tuesday, January 18, 2005 - 05:07 pm:    See http://discus.4specs.com/discus/messages/24/1393.html and other posts for mnufacturers. Margaret G. Chewning CSI CCS Senior Member Username: presbspec Post Number: 41 Registered: 01-2003 Posted on Tuesday, January 18, 2005 - 05:15 pm:    Assuming you are using the product as a storage system, I'd include in in 10670 (MF95) Prefabricated Storage Systems or 10 57 00 (MF04) Wardrobe and Closet Specialties. I found a manufacturer that carries the system, StoreWall. Its on the 4Specs manufacturer's listing. Good luck. Dave Metzger Senior Member Username: davemetzger Post Number: 105 Registered: 07-2001 Posted on Tuesday, January 18, 2005 - 05:26 pm:    When I've specified these systems, since they were used as applied "paneling", I specified them under the Architectural Woodwork section. 4specs shows them under 11 2100 Mercantile Equipment. Sharon Lund Advanced Member Username: slundsehinccom Post Number: 5 Registered: 09-2003 Posted on Tuesday, January 18, 2005 - 05:48 pm:    This will be a steel wall system, so we didn't think Architectural Woodwork would be an appropriate section. Thanks for the manufacturer suggestions and the link to the previous thread on this subject. I appreciate your help. David Axt, AIA, CCS, CSI Senior Member Username: david_axt Post Number: 410 Registered: 03-2002 Posted on Tuesday, January 18, 2005 - 06:17 pm:    I just finished writing a section today. The name and number is 10141 Slot Wall Display Systems. I have no idea where we got the number, but it was an old section in the master file. Sharon Lund Senior Member Username: slundsehinccom Post Number: 6 Registered: 09-2003 Posted on Wednesday, January 19, 2005 - 08:00 am:    David, would you be willing to share that section with me? I wouldn't use it verbatim, but only as a guide to develop my own. If so, my email is slund@sehinc.com. Leon Ruch, RA, CSI, CCS (Unregistered Guest) Unregistered guest Posted on Thursday, January 20, 2005 - 11:35 am:    I have it in my master along with other products in 06255 Prefinished Hardboard Paneling, which translates to 06 25 13. I see MF04 also has 06 26 13 Profile Board Paneling, which sounds like the product in question.