4specs.com    4specs.com Home Page

CSI...Who? Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Sustainable Design Topics » CSI...Who? « Previous Next »

Author Message
Russell W. Wood, CSI, CCS
Senior Member
Username: woodr5678

Post Number: 127
Registered: 11-2003
Posted on Friday, November 14, 2008 - 10:01 am:   Edit PostDelete PostPrint Post

Last week about 10 of us from our firm attended a multi-day LEED Training seminar in Pembroke Pines, Florida. The seminar was given jointly by the USGBC & the University of Florida. During registration, the architects in attendance signed up for their CEUs, the Engineers signed up their CEUs. When I told the CEU chair that I need CEUs for CSI...she didn't have a clue who or what CSI is, never heard of them. So much for being a well know, well respected organization.
J. Peter Jordan
Senior Member
Username: jpjordan

Post Number: 299
Registered: 05-2004
Posted on Friday, November 14, 2008 - 11:39 am:   Edit PostDelete PostPrint Post

CSI as in the CSI format? the one with the Division 17 where the LEED exam expects you to put control systems?
Anne Whitacre, FCSI CCS
Senior Member
Username: awhitacre

Post Number: 856
Registered: 07-2002
Posted on Friday, November 14, 2008 - 12:12 pm:   Edit PostDelete PostPrint Post

I think it just points out how the LEED exam doesn't really prepare people to actually work on, like, a real job.
Lynn Javoroski CSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 828
Registered: 07-2002
Posted on Friday, November 14, 2008 - 01:44 pm:   Edit PostDelete PostPrint Post

And has anyone even heard of LEED Miami or LEED New York? NO!
Anonymous
 
Posted on Friday, November 14, 2008 - 03:27 pm:   Edit PostDelete PostPrint Post

Well yes actually, there's a big article about the Broward & Dade LEED chapters in the current edition of SE Construction magazine.
Phil Kabza
Senior Member
Username: phil_kabza

Post Number: 342
Registered: 12-2002
Posted on Monday, November 17, 2008 - 09:38 am:   Edit PostDelete PostPrint Post

So what is the strategy for CSI Institute level and Chapter level to recover a portion of the industry's available membership numbers, income stream, and volunteer time that the USGBC has drawn away from CSI?

"Saving the planet" engages people's emotions. "Reducing claims and disputes" ... doesn't have the same ring. It's a tough challenge.

Successful Chapters hold dialog with A/E firm marketing leaders. It's the marketing directors and partners that sell their firms' capabilities to clients. They're the ones who have pushed the firms to get LEED AP'd staff. They often don't know enough about their own services to know how important the quality of A/E's instruments of service are to clients.

The Institute and the Chapters need to constantly teach A/E firms about this, so that CDT, CCS, and CCCA become valuable bragging points. A single avoided client dispute is worth a lifetime membership in CSI. Until the A/E firms view the involvement of their staff in CSI as a valuable component fo their professional development, CSI membership will continue to be of mixed interest to A/E firm managers; they may pay for one individual to belong, but it may not occur to many of them to pay for several memberships and actively promote chapter activities.

Further discussion on CSI's Strategy should be here where I added this posting - Colin
http://discus.4specs.com/discus/messages/25/4195.html?1226949143
Joel McKellar, LEED AP
Senior Member
Username: joelmckellar

Post Number: 35
Registered: 02-2006
Posted on Monday, December 01, 2008 - 11:36 am:   Edit PostDelete PostPrint Post

Anne, to say the LEED exam is meant to prepare someone for an architecture/engineering job is unfair... Though people frequently misinterpret the meaning of LEED AP, the point is to verify a basic knowledge about the LEED processes and procedures. Knowledge of your respective trade is certainly not included in the scope of the exam.

Though I feel I know a fair amount about LEED specifically, I'm the first to point out how much I have yet to learn about architecture and specifications (as past posts clearly show!). I consider myself lucky to have very knowledgeable co-workers and forums such as this one to learn from.

As a local USGBC branch, we're spending 2009 having joint meetings across all of our allied organizations, including CSI (though nothing is firm yet). The intent is not only to raise awareness among those organizations about our branch, but also to inform our diverse membership about the resources that are available in the more trade specific organizations.

I can't speak for other branches and chapters, but I would suspect many would be open to similar partnership opportunities. I suspect that on the whole our members will learn more about the allied organizations than the other way around. For all their faults, the USGBC is a well oiled marketing and awareness machine...
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 142
Registered: 01-2008
Posted on Monday, December 01, 2008 - 11:53 am:   Edit PostDelete PostPrint Post

Joel,

I say this will all due respect. A good start for you would be to attain CDT and CCS certification, followed by LEED AP. Then your business card will read Joel McKeller, CDT, CCS, LEED AP.

I am not a LEED AP but I am a CCS (1990). However, I write LEED requirements in my project manuals for almost every project but in my opinion my CCS trumps LEED AP every time. I am far more dangerous without a CCS than I am without LEED AP.

There are lawusits galore resulting from bad specs but I know of only one lawsuit concerning LEED and it was about expectations, not about vague and ambiguous language or forgetting a LEED credit.

I am sorry , but I stand behind Anne's comment.

Wayne
Kris Kennedy
Junior Member
Username: kris_kennedy

Post Number: 2
Registered: 01-2008
Posted on Monday, December 01, 2008 - 12:28 pm:   Edit PostDelete PostPrint Post

To go back to what I understand Russel's question to be... Yes, CSI was lagging behind on counting CEU's. They seem to have gotten on the bandwagon lately with the CEN -
http://www.education.csinet.org/
(I use AIA as my predominate site for counting CEU's, I don't know how well this is working.)

It might be too much to ask to have the host fill out forms for AIA, Engineers, CSI, EIEIO's...
Joel McKellar, LEED AP
Senior Member
Username: joelmckellar

Post Number: 37
Registered: 02-2006
Posted on Monday, December 01, 2008 - 01:29 pm:   Edit PostDelete PostPrint Post

Wayne,

I should have been clearer earlier. My point was not to say that LEED AP means you're qualified to write specs, or perform pretty much any job for that matter, and in that sense I agree with you and Anne as well. I would never compile contract documents on my own with the experience I currently have, LEED AP or no. On the other hand I review and comment on specifications language written by qualified specifiers to make sure we haven't missed any requirements related to LEED specifically.

If your job is to write specifications then CDT and CCS designations should most definitely be earned concurrently or first, and I didn't mean to imply otherwise. The LEED AP designation should be in addition to, not a replacement for, proper training and certification in people's respective trades.
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 143
Registered: 01-2008
Posted on Monday, December 01, 2008 - 02:14 pm:   Edit PostDelete PostPrint Post

Joel,

Well said.

Add Your Message Here
Post:
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration