4specs.com    4specs.com Home Page

Florida Spec Writers Dilemma Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Sustainable Design Topics » Florida Spec Writers Dilemma « Previous Next »

Author Message
Anonymous
 
Posted on Wednesday, July 09, 2008 - 04:57 pm:   Edit PostDelete PostPrint Post

I write specs for public agencies in the state of Florida. On July 1st a Florida law went in affect that public projects commenced after that date must be LEED compliant. I have written some green product sections...but have not written a full-blown LEED compliant spec (Divs 1-49). Those of you that have written specs for LEED Certified projects...how long did it take you to convert your specs to be LEED compliant?. I've asked around a bit and have heard up to five years. Goodnight nurse, I've probably got about a month or two tops.
Lynn Javoroski CSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 785
Registered: 07-2002
Posted on Wednesday, July 09, 2008 - 05:03 pm:   Edit PostDelete PostPrint Post

You will need to contact the LEED AP for the project to determine what credits are being sought and for what level. If you subscribe to a master specification service, they should have the possible credits in each category/section listed within the body of the spec sections. There will be submittals for each point sought in addition to the products being compliant. Choice of product and keeping track of the submittals would be the first step. Products are not LEED certified, projects are. You will probably need a Division 01 LEED section; many of the points are from the mechanicals and commissioning.
Richard Howard, AIA CSI CCS LEED-AP
Senior Member
Username: rick_howard

Post Number: 188
Registered: 07-2003
Posted on Wednesday, July 09, 2008 - 05:20 pm:   Edit PostDelete PostPrint Post

Even though you are working at the state government level, an excellent resource would be the Federal Green Construction Guide for Specifiers at the following URL:
http://www.wbdg.org/design/greenspec.php
You can extract a lot of appropriate green language from the model specs.
Anne Whitacre, FCSI CCS
Senior Member
Username: awhitacre

Post Number: 799
Registered: 07-2002
Posted on Wednesday, July 09, 2008 - 06:33 pm:   Edit PostDelete PostPrint Post

You probably won't have to do a lot to your specs -- there are essentially, two issues:
1) select relatively "green" products in the first place, and its possible that you have many of those already in your system.
2) specify the LEED documentation -- and that can be a separate section with other paragraphs in some sections.

Arcom publishes a pretty good book for this -- and you don't have to be a Masterspec subscriber to get it (although that would lower your price). the book is "Specifying LEED Requirements" and its on their website (www.arcomnet.com). I think its the most basic nuts-and-bolts primer out there. Another option is "Green Building Materials" by Speigel and Meadows, but it takes a wider-view approach and may not be as instructive/simplistic as you need to change over your specs.

Add Your Message Here
Post:
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration