4specs.com    4specs.com Home Page

Wood Entrances and Storefronts? Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » MasterFormat 2004 Discussions » Wood Entrances and Storefronts? « Previous Next »

Author Message
David G. Axt, CCS, CSI ,SCIP
Senior Member
Username: david_axt

Post Number: 1541
Registered: 03-2002

Posted on Wednesday, January 11, 2017 - 02:43 pm:   Edit PostDelete PostPrint Post

What MasterFormat number should I use for wood entrances and storefronts?

David G. Axt, CCS, CSI, SCIP
Specifications Consultant
Axt Consulting LLC
Jeffrey Wilson CSI CCS SCIP
Senior Member
Username: wilsonconsulting

Post Number: 205
Registered: 03-2006

Posted on Wednesday, January 11, 2017 - 03:13 pm:   Edit PostDelete PostPrint Post

I have used 08 4133 "Wood-Framed Storefront Systems".

MasterFormat does include 08 4311 "Timber-Framed Storefronts."
Jeffrey Wilson CCS CSI SCIP
Wilson Consulting Inc
Ardmore PA
Guest (Unregistered Guest)
Unregistered guest
Posted on Wednesday, January 11, 2017 - 06:41 pm:   Edit PostDelete PostPrint Post

David - FYI; previously spec'd Duratherm Corporation as BOD for a Bahrain restaurant.
J. Peter Jordan
Senior Member
Username: jpjordan

Post Number: 929
Registered: 05-2004
Posted on Thursday, January 12, 2017 - 12:04 pm:   Edit PostDelete PostPrint Post

Depending on the specific application and whether or not you needed some sort of compliance with structural requirements, you could specify the frames and trim in Division 06 and the doors as glazed stile and rail doors in Division 08.
J. Peter Jordan, FCSI, AIA, CCS, LEED AP, SCIP

Add Your Message Here
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Options: Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration