sliding/folding glass walls

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Ronald J. Ray, RA, CCS, CCCA Senior Member Username: rjray Post Number: 100 Registered: 04-2004 Posted on Thursday, June 07, 2012 - 09:25 pm:    Folks, What specification number and title would you recommend for "Nanawall" type sliding and folding wall systems? Thanks Ron Liz O'Sullivan Senior Member Username: liz_osullivan Post Number: 56 Registered: 10-2011 Posted on Thursday, June 07, 2012 - 10:56 pm:    I've used 10 22 39.13 "Folding Glass-Panel Partitions" for a Nanawall system to be used INSIDE. MasterSpec has that section. But if it's in an exterior wall, I think it should go in Division 08, but I don't know where. Nanawall has it all over the place. Not a good answer, I know. Lynn Javoroski FCSI CCS LEEDŽ AP SCIP Affiliate Senior Member Username: lynn_javoroski Post Number: 1496 Registered: 07-2002 Posted on Friday, June 08, 2012 - 09:32 am:    08 42XX or 08 43XX? That would put it in entrance/storefront/glazed wall category. Pick an unused number for the last 2 digits that best signifies the system. Since, as Liz wrote, the manufacturer can't seem to decide, you're able to place it where you think best. John Hunter Senior Member Username: johnhunter Post Number: 95 Registered: 12-2005 Posted on Friday, June 08, 2012 - 01:44 pm:    We've used 08 1329 "Sliding Storefronts" for both interior and exterior applications. John Hunter Senior Member Username: johnhunter Post Number: 96 Registered: 12-2005 Posted on Friday, June 08, 2012 - 01:45 pm:    That should be 08 4329 "Sliding Storefronts." Jeffrey Wilson CSI CCS Senior Member Username: wilsonconsulting Post Number: 68 Registered: 03-2006 Posted on Friday, June 08, 2012 - 03:18 pm:    I use 08 4115 "Operable Glazed Panel Systems" and have developed an office master if you're interested: Jeff at WilsonConsultingInc dot com.