4specs.com    4specs.com Home Page

thin brick panel systems? 07 42 00 or... Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » MasterFormat 2004 Discussions » thin brick panel systems? 07 42 00 or 04 25 00? « Previous Next »

Author Message
Brian E. Trimble, CDT
Senior Member
Username: brian_e_trimble_cdt

Post Number: 42
Registered: 08-2005
Posted on Wednesday, May 11, 2011 - 05:09 pm:   Edit PostDelete PostPrint Post

OK, so I have a thin brick system that is bonded to an insulated thin metal backing. The units are placed into the panel in the field. The only mortar that is used may be between the brick only. This is meant for exterior work, but could be done on interior walls too. So would this fit under 07 42 00 on wall panels or 04 25 00 on unit masonry panels?
Wayne Yancey
Senior Member
Username: wayne_yancey

Post Number: 458
Registered: 01-2008

Posted on Wednesday, May 11, 2011 - 05:14 pm:   Edit PostDelete PostPrint Post


We specified in new section 042513 METAL SUPPORTED UNIT MASONRY PANELS.

Project looks very good. If you want, I will share our section. E-mail to wayne.yancey@callison.com

Add Your Message Here
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Options: Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration