4specs.com    4specs.com Home Page

Perforated gypsum board? Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » MasterFormat 2004 Discussions » Perforated gypsum board? « Previous Next »

Author Message
David Axt, AIA, CCS, CSI
Senior Member
Username: david_axt

Post Number: 1065
Registered: 03-2002

Posted on Wednesday, December 16, 2009 - 11:08 pm:   Edit PostDelete PostPrint Post

I am specifying a perforated gypsum product to be used in a ceiling application. Where do I specify it?

The product I am looking at is Danoline: http://danoline-uk.com/
Ralph Liebing, RA, CSI, CDT
Senior Member
Username: rliebing

Post Number: 1112
Registered: 02-2003
Posted on Thursday, December 17, 2009 - 06:42 am:   Edit PostDelete PostPrint Post

Couldn't it just fit in your Gyp Bd Assemblies Section? Sounds like the only difference between a solid drywall ceiling and your product is the perforations
John Bunzick, CCS, CCCA, LEED AP
Senior Member
Username: bunzick

Post Number: 1150
Registered: 03-2002
Posted on Thursday, December 17, 2009 - 09:00 am:   Edit PostDelete PostPrint Post

Product looks like it goes in a suspension grid, so I'd put it in with acoustical ceilings.

Add Your Message Here
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Options: Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration