4specs.com    4specs.com Home Page

swimsuit water extractor Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » MasterFormat 2004 Discussions » swimsuit water extractor « Previous Next »

Author Message
Robin E. Snyder
Senior Member
Username: robin

Post Number: 254
Registered: 08-2004
Posted on Tuesday, June 09, 2009 - 01:54 pm:   Edit PostDelete PostPrint Post

Any suggestions for a number?
Russ Hinkle, AIA, CDT, LEED AP
Senior Member
Username: rhinkle

Post Number: 62
Registered: 02-2006
Posted on Tuesday, June 09, 2009 - 01:57 pm:   Edit PostDelete PostPrint Post

36 2436

(sorry, I could not resist!)
Russ Hinkle
Jerry Tims AIA, CSI
Senior Member
Username: jtims

Post Number: 83
Registered: 04-2005
Posted on Tuesday, June 09, 2009 - 01:59 pm:   Edit PostDelete PostPrint Post

I've got 'em in 11 6614.
Colin Gilboy
Senior Member
Username: colin

Post Number: 190
Registered: 09-2005


Posted on Tuesday, June 09, 2009 - 02:09 pm:   Edit PostDelete PostPrint Post

Hint - it is not in the MasterFormat book.

Perhaps better understood using an alternate format for the numbers:

36 24 36
Colin Gilboy
Publisher, 4specs.com
435.654.5775 - Utah
800.369.8008
Lynn Javoroski CSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 891
Registered: 07-2002
Posted on Tuesday, June 09, 2009 - 02:26 pm:   Edit PostDelete PostPrint Post

You guys!...I think it should be 11 2346...or somewhere in there.
John Bunzick, CCS, CCCA, LEED AP
Senior Member
Username: bunzick

Post Number: 1053
Registered: 03-2002
Posted on Tuesday, June 09, 2009 - 02:37 pm:   Edit PostDelete PostPrint Post

I agree with Lynn.
Jerry Tims AIA, CSI
Senior Member
Username: jtims

Post Number: 84
Registered: 04-2005
Posted on Tuesday, June 09, 2009 - 02:43 pm:   Edit PostDelete PostPrint Post

Hmmmm.....I agree with Lynn too. I'm changing mine!
Bob Woodburn, RA CSI CCS CCCA LEED AP
Senior Member
Username: bwoodburn

Post Number: 285
Registered: 01-2005
Posted on Tuesday, June 09, 2009 - 02:51 pm:   Edit PostDelete PostPrint Post

Division 36 is "reserved for future expansion," which reminds me of the story about an applicant for a modeling job. The interviewer handed her a swimsuit and said, "Fill out this form..."
Gary L. Beimers, FCSI, CDT, CSC
Senior Member
Username: gbeimers

Post Number: 24
Registered: 05-2005
Posted on Tuesday, June 09, 2009 - 03:33 pm:   Edit PostDelete PostPrint Post

One of the master specification providers had a product-specific section for these at 11 66 14. However the 11 23 00 group does have some merit. Consider the title of 11 23 26 - Commercial Washers and EXTRACTORS. Hmmmm
Lynn Javoroski CSI CCS LEEDŽ AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 892
Registered: 07-2002
Posted on Tuesday, June 09, 2009 - 03:35 pm:   Edit PostDelete PostPrint Post

Yup, that's why I went there. I only differentiated it because there's no washer and it's a special sort of extractor. And, it's NOT a piece of Athletic Equipment, which the 11 66xx is.
Jerry Tims AIA, CSI
Senior Member
Username: jtims

Post Number: 85
Registered: 04-2005
Posted on Tuesday, June 09, 2009 - 03:36 pm:   Edit PostDelete PostPrint Post

I'm sticking with "Swimsuit Water Extractors".

Add Your Message Here
Post:
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration