4specs.com    4specs.com Home Page

Epoxy Ramps Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » MasterFormat 2004 Discussions » Epoxy Ramps « Previous Next »

Author Message
Ralph Liebing, RA, CSI
Senior Member
Username: rliebing

Post Number: 918
Registered: 02-2003
Posted on Wednesday, October 15, 2008 - 10:47 am:   Edit PostDelete PostPrint Post

Jump ball, folks!

Suggest Division and Section number for an epoxy polymer/ aggregate "concoction" to be used for new ramps in an industrial plant.

This is not an additive to ready-mix. Have data on product but need place for it in specs.
Ronald L. Geren, AIA, CSI, CCS, CCCA, SCIP
Senior Member
Username: specman

Post Number: 701
Registered: 03-2003
Posted on Wednesday, October 15, 2008 - 10:54 am:   Edit PostDelete PostPrint Post

Ralph, look at 09 67 00 "Fluid-Applied Flooring" in your MasterFormat book and see if any of the Level 3 titles fit your product.

Add Your Message Here
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Options: Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration