Security Mesh

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message Ricardo Baerga-Ibáñez, CSI, CCS, CCCA (Unregistered Guest) Unregistered guest Posted on Monday, January 15, 2007 - 10:02 am:    In which section would I specify steel security when included in drywall partitions? I looked in Masterformat 2004 and the only reference I found to steel mesh was welded wire fabric but was referred to Division 3, and that's only for products used in concrete. Thanks in advance! Richard Howard, AIA CSI CCS Senior Member Username: rick_howard Post Number: 106 Registered: 07-2003 Posted on Monday, January 15, 2007 - 10:52 am:    Expanded steel security mesh is usually specified in the drywall section. John Bunzick, CCS, CCCA Senior Member Username: bunzick Post Number: 636 Registered: 03-2002 Posted on Monday, January 15, 2007 - 11:50 am:    Typically this is flattened expanded metal, specified as an accessory to drywall. The EMMA component of NAAMM has a standard for expanded at this link: http://www.naamm.org/emma/pdfs/EMMA557-99.pdf. Ricardo Baerga-Ibáñez, CSI, CCS, CCCA (Unregistered Guest) Unregistered guest Posted on Monday, January 15, 2007 - 11:23 am:    Thanks so much; I was thinking I could add it as an accessory.