4specs.com    4specs.com Home Page

Spelling Error for the Day Log Out | Topics | Search
Moderators | Register | Edit Profile

4specs Discussion Forum » Archive Coffee Pot and Water Cooler #2 » Spelling Error for the Day « Previous Next »

Author Message
Lisa Goodwin Robbins, RA, CCS, LEED ap
Senior Member
Username: lgoodrob

Post Number: 353
Registered: 08-2004
Posted on Wednesday, September 05, 2018 - 05:32 pm:   Edit PostDelete PostPrint Post

We just had an Architect ask for "turncoat" metal. Do you think they picked a color called "Benedict Arnold" too?
-
Edward J Dueppen, RA, CSI, CCS, LEED AP
Senior Member
Username: edueppen

Post Number: 51
Registered: 08-2013
Posted on Wednesday, September 05, 2018 - 06:32 pm:   Edit PostDelete PostPrint Post

My all-time favorite, besides the all-too common "support angels", is "fur bearing wall".
Chris Grimm, CSI, CCS, SCIP, LEED AP BD+C
Senior Member
Username: chris_grimm_ccs_scip

Post Number: 419
Registered: 02-2014


Posted on Wednesday, September 05, 2018 - 07:32 pm:   Edit PostDelete PostPrint Post

Break metal
David R. Combs, Assoc. AIA, CSI, CCCA, LEED AP
Senior Member
Username: davidc

Post Number: 8
Registered: 02-2015
Posted on Wednesday, September 05, 2018 - 07:47 pm:   Edit PostDelete PostPrint Post

Too many over the years to recall them all, but I found these to be some of the more amusing ones:
Laundry shoot.
Firestop puddy.
Steel angle lentils.
Break metal is one of the most common.
David R. Combs, Assoc. AIA, CSI, CCCA, LEED AP
Associate Principal
Technical Director
David E Lorenzini
Senior Member
Username: deloren

Post Number: 180
Registered: 04-2000


Posted on Wednesday, September 05, 2018 - 08:35 pm:   Edit PostDelete PostPrint Post

Can't strip
David Lorenzini, FCSI, CCS
Architectural Resources Co.
anon (Unregistered Guest)
Unregistered guest
Posted on Wednesday, September 05, 2018 - 07:46 pm:   Edit PostDelete PostPrint Post

Trash Shoots
Michael Chusid, RA FCSI CCS
Senior Member
Username: michael_chusid

Post Number: 421
Registered: 10-2003


Posted on Thursday, September 06, 2018 - 10:28 am:   Edit PostDelete PostPrint Post

"The Bidding Documents shall become the Contract Documents upon execution of the Contractor."
Michael Chusid, RA FCSI CCS 1-818-219-4937
www.chusid.com www.buildingproduct.guru
Paul Sweet (Unregistered Guest)
Unregistered guest
Posted on Thursday, September 06, 2018 - 12:55 pm:   Edit PostDelete PostPrint Post

These may be more regional dialect than actual misspelling:
Footer
Masonary
Chimbley
Guest (Unregistered Guest)
Unregistered guest
Posted on Thursday, September 06, 2018 - 12:59 pm:   Edit PostDelete PostPrint Post

I caught that the room tag for "Public Cafe" was missing the "L" once.

I also pointed out "Shool" on the drawing cover page for a new K-12 School ... embarrassing.
J. Peter Jordan
Senior Member
Username: jpjordan

Post Number: 1053
Registered: 05-2004
Posted on Sunday, September 09, 2018 - 10:41 am:   Edit PostDelete PostPrint Post

I once saw a note for a "flog pole" on drawings for a middle school.
J. Peter Jordan, FCSI, AIA, CCS, LEED AP, SCIP
Lynn Javoroski FCSI CCS LEED® AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 2166
Registered: 07-2002


Posted on Sunday, September 09, 2018 - 01:31 pm:   Edit PostDelete PostPrint Post

I remember a "repelling wall" on a fire department training building.
Ellis C. Whitby, PE, CSI, AIA, LEED
Senior Member
Username: ecwhitby

Post Number: 408
Registered: 03-2003
Posted on Monday, September 10, 2018 - 07:13 pm:   Edit PostDelete PostPrint Post

When I was a freshman in high school I recall that there was a "repelling wall" around the senior girls.
Brett Scarfino (Unregistered Guest)
Unregistered guest
Posted on Wednesday, September 12, 2018 - 10:57 am:   Edit PostDelete PostPrint Post

On the cover of shops, big letters at top of page - "CFLOORAND, OH". At least they got the state right.

Amusing word choice in a set of overseas curtain wall shop drawings: "Pyrotechnics Hole".
Intended to mean "access hole".
Steven Bruneel, AIA, CSI-CDT, LEED-AP, EDAC
Senior Member
Username: redseca2

Post Number: 659
Registered: 12-2006


Posted on Wednesday, September 12, 2018 - 04:49 pm:   Edit PostDelete PostPrint Post

I was reviewing the scope of Site Furnishings with the Landscape Architect for a University Student Housing project via email and they provided a list of items:

Benches, Chairs, Tables, Basketball Hoops, Shade Structures, Corn Holes.

Hmmm, what is a Corn hole? I looked over my shoulder before I googled Corn Hole, afraid of what might pop up on my screen. No worries, merely the target for a bean bag toss game.

I recall searching for the term "Metal Studs" back in the 1990's, in the "Ask Jeeves" ages, well before Google. The first thing I opened was an image of some young men wearing giant Mohawk hair, fancy cowboy boats, big electric guitars, and nothing else. This was in the simple time years before SSMA thought they needed a website.
Margaret G. Chewning FCSI CCS
Senior Member
Username: presbspec

Post Number: 308
Registered: 01-2003
Posted on Thursday, September 13, 2018 - 01:31 pm:   Edit PostDelete PostPrint Post

Altho’ not a spelling error on the drawings, in a project meeting with the assistant librarian for the expansion of the ODU library, we were discussing “flashing” when the librarian started to blush with a strange look on her face. I had to take her aside and explain what construction flashing really is.
Ed Storer
Senior Member
Username: ed_storer

Post Number: 24
Registered: 05-2009
Posted on Saturday, August 31, 2019 - 02:34 pm:   Edit PostDelete PostPrint Post

I find that many participants in forums like this one (I know it should be "fora" - but so few have studied Latin) are "homonym-challenged" and "Break Metal" is phonetically correct, but is used by drafters that have been told "Brake Metal" but never saw a bending brake.

I could go on, but homonyms seem to be a problem for those who learned by "Hooked on Phonics" instead of a rigorous spelling and vocabulary curriculum.

The spell-check feature is something that I tend to rely on, but it doesn't recognize "closer" and suggests "closure" and so forth.

I guess that's why I'm a specifier and not a production architect.
Lynn Javoroski FCSI CCS LEED® AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 2195
Registered: 07-2002


Posted on Saturday, August 31, 2019 - 03:26 pm:   Edit PostDelete PostPrint Post

While I never studied Latin, I've picked up some in my years of reading just about everything I could get my hands on, so "fora" would have only confused me for a second or two. But yeah, homonyms can "getcha" if you're not careful. (Like you're, your, there, their, they're...and other similar words).

The first time I came across the word "arris", I thought it was a spelling error. Good thing I thought to look it up BEFORE I sent the documents out with my correction to "arise"!
Dan Helphrey
Senior Member
Username: dbhelphrey

Post Number: 37
Registered: 12-2018
Posted on Tuesday, September 03, 2019 - 02:01 pm:   Edit PostDelete PostPrint Post

According to Strunk & White, "forums" and "fora" are both acceptable in English.

I did residential plan check for a couple years, and at least 80% of the drawings had a room labeled "dinning."
Lynn Javoroski FCSI CCS LEED® AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 2197
Registered: 07-2002


Posted on Tuesday, September 03, 2019 - 02:05 pm:   Edit PostDelete PostPrint Post

A room in which you can make all the noise you can! So many houses allow noise in all the rooms - what a boon to parents!
Louis Medcalf, FCSI, CCS
Senior Member
Username: louis_medcalf

Post Number: 108
Registered: 11-2010
Posted on Thursday, September 19, 2019 - 04:17 pm:   Edit PostDelete PostPrint Post

I reviewed electrical drawings some time ago that noted what the "mountain height" was for some wall sconces.
Melissa J Aguiar
Senior Member
Username: melissajaguiar

Post Number: 10
Registered: 09-2015
Posted on Thursday, September 19, 2019 - 04:26 pm:   Edit PostDelete PostPrint Post

Louis,

You win! You have my vote! I had to share this one with everyone around my office while cackling!!! HA! :-)
Marc Chavez
Senior Member
Username: mchavez

Post Number: 527
Registered: 07-2002
Posted on Thursday, September 19, 2019 - 04:34 pm:   Edit PostDelete PostPrint Post

here is one that is NOT a spelling error but I thought it was: I was alerted by staff of a typo throughout a particular electrical section for "contactor" I thought oh yes "contractor" misspelled...but ask to see the section... "the electrical contactor..." and it took me a few minutes to see the context..

OH! not a misspelling after all...

see definition below

A contactor is an electrically-controlled switch used for switching an electrical power circuit. A contactor is typically controlled by a circuit which has a much lower power level than the switched circuit, such as a 24-volt coil electromagnet controlling a 230-volt motor switch.
Lynn Javoroski FCSI CCS LEED® AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 2201
Registered: 07-2002


Posted on Thursday, September 19, 2019 - 04:40 pm:   Edit PostDelete PostPrint Post

Whatever would we all do each day were it not for the occasional chuckle or laugh-out-loud experience provided by these "errors"?
Marc Chavez
Senior Member
Username: mchavez

Post Number: 528
Registered: 07-2002
Posted on Thursday, September 19, 2019 - 04:52 pm:   Edit PostDelete PostPrint Post

My wife was adjudicating a trial this week of a man accused of wearing a human skull on a chain around his neck (note: you cannot go around carrying human body parts ..except your own) so....as the trial was to finish the next day I asked if there was any ex"skull"patory evidence...nuk nuk nuk...she said....No . he was found guilty.
Lynn Javoroski FCSI CCS LEED® AP SCIP Affiliate
Senior Member
Username: lynn_javoroski

Post Number: 2202
Registered: 07-2002


Posted on Thursday, September 19, 2019 - 04:56 pm:   Edit PostDelete PostPrint Post

Groan...

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration