| Author |
Message |
Jerome J. Lazar, RA, CCS, CSI, NCARB
Senior Member
Username: lazarcitec
Post Number: 1885
Registered: 05-2003
| | Posted on Sunday, May 20, 2018 - 02:55 am: |    |
Viva Railings has a new railing infill, laser cut metal, very cool, my client is calling for it to be used on railings in a retail building, there are no specs available on web site for this new product, so am I just crazy at being concerned about using laser cut stainless steel, to me it sounds like razor cut? Is there a way to laser cut stainless steel without leaving a razor edge?
This is he downside of working on weekends, no manufacturer responses, but there is always this forum. |
Brian Payne, AIA
Senior Member
Username: brian_payne
Post Number: 144
Registered: 01-2014
| | Posted on Sunday, May 20, 2018 - 03:24 pm: | |
In my opinion, nothing to overly worry yourself about. We’ve done a fair amount of laser cut metal and never had an issue with sharp edges. Spec a sample in submissions to verify. |
Wayne Yancey
Senior Member
Username: wayne_yancey
Post Number: 867
Registered: 01-2008
| | Posted on Monday, May 21, 2018 - 01:05 pm: | |
Jerome,
Please go to http://www.productmasterspec.com/construction_specifications?view=05 and scroll down to 057300 DECORATIVE METAL RAILINGS by VIVA Railings, LLC.
Save this website for other masterspecs from product manufacturers. FREE, FREE at last. |
|
4specs.com Home Page