| Author |
Message |
Robert Swan, FCSI, SCIP
New member
Username: robeswan
Post Number: 1
Registered: 12-2016
| | Posted on Friday, February 10, 2017 - 12:38 pm: |    |
The Architect wants to have smooth faces on the CMU used as interior walls. The only manufacturer he could find was 500 plus miles from the construction site. Anyone know a manufacturer near Louisiana? |
J. Peter Jordan
Senior Member
Username: jpjordan
Post Number: 938
Registered: 05-2004
| | Posted on Friday, February 10, 2017 - 06:02 pm: | |
Have you looked into ground face CMU. There are several Headwaters plants in this area that offer this product. A variety of colors is available.
J. Peter Jordan, FCSI, AIA, CCS, LEED AP, SCIP
|
Brian E. Trimble, CDT
Senior Member
Username: brian_e_trimble_cdt
Post Number: 91
Registered: 08-2005
| | Posted on Friday, March 03, 2017 - 09:27 am: | |
I assume you have looked at State Block in Metairie (http://www.stateblockinc.com/)? I don't know if they make ground-face CMU, but you can check. |
|
4specs.com Home Page