| Author |
Message |
Remi Bourque
New member
Username: remibourque
Post Number: 1
Registered: 11-2018
| | Posted on Wednesday, November 21, 2018 - 03:11 pm: |    |
Hi 4specs community,
I'm having a hard time finding a good reference for Section 13 18 16. I usually rely on NMS when the office doesn't have a past history with a specification section but it comes up empty. For some reason, I'm having no luck finding any dasher board specifications. Does anyone have insight for me? Thanks! |
ken hercenberg
Senior Member
Username: khercenberg
Post Number: 1200
Registered: 12-2006
| | Posted on Wednesday, November 21, 2018 - 04:31 pm: | |
My guess is that you'll need to reach out to a number of manufacturers to see if any of them have guide specs.
I don't know if there's a good Section to start with otherwise. Perhaps something with aluminum extrusions since that is often used in dasher board support systems I've seen in the past. |
David E Lorenzini
Senior Member
Username: deloren
Post Number: 181
Registered: 04-2000
| | Posted on Wednesday, November 21, 2018 - 07:51 pm: | |
Remi, I just finished a huge ice hockey arena with five rinks.Send me your email address for a copy of what I used. deloren at scip dot com.
David Lorenzini, FCSI, CCS
Architectural Resources Co. |
4specs.com Home Page