| Author |
Message |
Michelle Roberts
Junior Member
Username: mroberts251
Post Number: 2
Registered: 08-2016
| | Posted on Saturday, March 10, 2018 - 09:15 am: |    |
I am working with a few commercial building developers that want to use ICFs opposed to wood framing. Does anyone have experience with writing the spec section? I am excited as my next door neighbor manufacturers ICFs here in Massachusetts!
I have learned so much about EPS vs XPS vs Mineral Wool and have been to over 10 of these plants over the years.
Best,
Michelle Roberts, Principal
Chatham Hill
Resilient Design & Building Systems
|
Lisa Goodwin Robbins, RA, CCS, LEED ap
Senior Member
Username: lgoodrob
Post Number: 342
Registered: 08-2004
| | Posted on Monday, March 19, 2018 - 11:40 am: | |
Hi Michelle,
If you go to www.arcat.com and search for icf specs, there are four companies listed there.
Call me if you need more help.
- |
Guest (Unregistered Guest)
Unregistered guest
| | Posted on Monday, March 19, 2018 - 12:20 pm: | |
UFGS also has master section. |
J. Peter Jordan
Senior Member
Username: jpjordan
Post Number: 1024
Registered: 05-2004
| | Posted on Monday, March 19, 2018 - 05:58 pm: | |
Although it is a fur piece (as we say in Texas), you might want to look into the Bautex system. the units are manufactured in San Marcos, Texas (between Austin and San Antonio).
J. Peter Jordan, FCSI, AIA, CCS, LEED AP, SCIP
|
|
4specs.com Home Page