| Author |
Message |
Lisa Goodwin Robbins, RA, CCS, LEED ap
Senior Member
Username: lgoodrob
Post Number: 300
Registered: 08-2004
| | Posted on Thursday, September 08, 2016 - 09:02 am: |    |
Dear esteemed colleagues,
Where would you put a pre-engineered metal rooftop assembly, which my design Architect is calling a 'dog house'? It's a rooftop curb-mounted box, designed to collect a variety of pipes, conduits, and telecom cables. I'm thinking about one of the following:
-107400 Manufactured Exterior Specialties
-133400 Fabricated Engineered Structures
Thanks for your help.
- |
Richard A. Rosen, CSI, CCS, AIA
Senior Member
Username: rarosen
Post Number: 123
Registered: 08-2006
| | Posted on Thursday, September 08, 2016 - 01:27 pm: | |
How about 077250 Pipe and Penetration Flashing Systems? Check out Alta Products, The Vault, and ThyCurb (pipe curb) all accessible here on 4specs. |
Lisa Goodwin Robbins, RA, CCS, LEED ap
Senior Member
Username: lgoodrob
Post Number: 301
Registered: 08-2004
| | Posted on Thursday, September 08, 2016 - 02:03 pm: | |
Richard,
Yes, those are exactly what the design Architect wants. Maybe I was overthinking this, because they are pre-engineered and pre-fabricated.
- |
Steven Bruneel, AIA, CSI-CDT, LEED-AP, EDAC
Senior Member
Username: redseca2
Post Number: 559
Registered: 12-2006
| | Posted on Friday, September 09, 2016 - 01:13 am: | |
I am often guilty of under thinking this sort of question. I must confess I have put them in the past in 07 72 00 - Roof accessories (or there about). |
Guest (Unregistered Guest)
Unregistered guest
| | Posted on Tuesday, September 13, 2016 - 06:32 pm: | |
Sounds like you described a cupola? Per MF, 10 74 23 Cupolas? |
|
4specs.com Home Page