| Author |
Message |
Dewayne Dean
Senior Member
Username: ddean
Post Number: 66
Registered: 02-2016
| | Posted on Wednesday, July 20, 2016 - 05:37 pm: |    |
We have a list of Millwork Companies listed in our Woodwork Spec. I hesitate to call them "approved" since the present state of the company is unknown.
Wondering how you guys handle this? |
Liz O'Sullivan
Senior Member
Username: liz_osullivan
Post Number: 204
Registered: 10-2011
| | Posted on Wednesday, July 20, 2016 - 05:42 pm: | |
For this, MasterSpec uses "Fabricators" as it does "Manufacturers."
("Fabricators: Subject to compliance with requirements, provide products by one of the following.")
This makes sense to me. |
Dewayne Dean
Senior Member
Username: ddean
Post Number: 67
Registered: 02-2016
| | Posted on Wednesday, July 20, 2016 - 05:46 pm: | |
I like it  |
David G. Axt, CCS, CSI ,SCIP
Senior Member
Username: david_axt
Post Number: 1489
Registered: 03-2002
| | Posted on Thursday, July 21, 2016 - 09:10 am: | |
I too avoid the terms "approved" and "accepted". I list manufacturers like this:
2.1 MANUFACTURERS
A. Basis of Design: ABC Company.
B. Other Manufacturers: Subject to compliance with requirements, provide products by one of the following:
1. DEF Inc.
2. GHI Enterprises.
3. JKL Manufaucturing.
4. Or approved substitute during the bid process per Specification Sections 002113 and 012500.
David G. Axt, CCS, CSI, SCIP
Specifications Consultant
Axt Consulting LLC |
4specs.com Home Page